Shop page iconDownload page icon

Choose your language

Made of LIGNO®: Apartment building "Krämer" 

Wood as match for anything

Die zwei zueinander versetzten Holzgebäude mit Satteldach zur Straße hin und Flachdach den Streuobstwiesen zugewandt bilden trotz Material-und Stilmix eine harmonische Einheit.
Diese Wohnung besticht mit einem großzügigen Wohnbereich, in welchem Wohn-, Esszimmer und Küche fließend ineinander übergehen und durch edle Echtholzdecken in Weißtanne made of LIGNO® verbunden werden.
In dem modern eingerichteten Wohnbereich tragen die edlen Weißtannenoberflächen an der Decke zu einem Gefühl von Wärme und Naturverbundenheit bei und eine gemütliche Atmosphäre entsteht.
Die Besonderheit der hier verarbeiteten LIGNO Deckenbauteile ist die endfertige Echtholzoberfläche aus astreiner Weißtanne, was mit seiner edlen Erscheinung den Ruf von Holz als rustikales Material widerlegt.
Das Schwarz der Küchenverkleidung findet sich auch in einer deckentragenden Metallsäule und dem schwarzen Kühlschrank wider. Dem entgegengewirkt wird durch die helle Weißtannendecke und hellgraue Bodenfliesen.
Dieses Badezimmer bekommt einen besonderen Flair durch die kunstvoll bedruckte Wand in Blau-und Grüntönen, sowie die feine Deckenprofilierung, die eine dynamische Atmosphäre kreiert.
Dafür, dass im Essbereich auch bei vielen Gästen der Geräuschpegel nicht Überhand nimmt, sorgen Lignotrend-Decken mit integriertem Absorber, die mit ihrer feinen Profilierung gleichzeitig als Designelement in der Wohnung wirken.
Der große Esstisch wird in Szene gesetzt von drei industriell anmutenden Hängelampen und die Sichtseite der Deckenbauteil verströmen mit ihrer edlen Oberfläche aus Weißtanne eine wohngesunde Raumatmosphäre.
Der seitlich verglaste Wohnbereich ist mit dunklen Böden ausgestattet, was einen aufregenden Kontrast zu den endfertigen Echtholzoberflächen der LIGNO® Decken aus astreiner Weißtanne darstellt.
Der großzügige Esstisch dieser Wohnung in dem Nürtinger Klimaholzhaus fasst die Farbe der hellen LIGNO® Decke in Weißtanne auf  und bildet einen klaren Kontrast zu dem dunklen Boden.
Dieser Flur direkt unter dem Spitzdach punktet mit Decken und Böden in warmem, unregelmäßigen Holz, viel Licht und Zugang zum Balkon.
Diese großzügige Galerie verströmt durch die Öffnung bis unter das Spitzdach Weite und die Echtholzsichtseite der verbauten LIGNO® Elemente kommt hier besonders gut zur Geltung.
Dieser Raum direkt unter dem Spitzdach ist rundum in Holz gekleidet, was zu einem maximalen Gefühl von Wärme und Naturverbundenheit führt - hier lassen sich die wohngesunden Eigenschaften der LIGNO® Bauteile ganz besonders gut spüren.
Die beiden neugebauten, sehr unterschiedlichen Klimaholzhäuser wirken sehr modern und fügen sich zugleich wunderbar  in die ländliche Wohnumgebung ein.

Creating living space not only for themselves but also for a few more families was the goal of two brothers in Nürtingen-Reudern. But how do you design a multi-family house on a suitable scale so that the new building blends harmoniously into the rural surroundings while still allowing for spacious, design-oriented living? For Bernhard and Hansjörg Krämer it was clear: we would build two climate-controlled timber houses. Not only because they come from a carpentry workshop where building with the natural material has been perfected for generations, but also because wood is the building material of the future. With the healthy houses made of configurable cross laminated timber elements from the manufacturer Lignotrend for walls, ceilings and roof, they are making an architectural statement for modern timber construction. 

Configuration overview

Components used

  • LIGNO® Rippe Q3  |  Ceiling component

    Produktkode: LIGNO® Rippe Q3_230-290_r0_ssp_z26_p0_a0_625-621-4_WTL_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _r0 Open, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _230-290 Medium span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z26 REI 30 Fire resistance

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected. 

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-621-4 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

  • LIGNO® Rippe Q3  |  Ceiling component

    Produktkode: LIGNO® Rippe Q3_230-290_r0_ssp_z26_p0_a50g_625-12-4_WTL_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _r0 Open, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _230-290 Medium span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z26 REI 30 Fire resistance

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected. 

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a50g 50% Absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12-4 Slat profile

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

  • LIGNO® Block Q  |  Roof component

    Produktkode: LIGNO® Block Q_70-150_rg0_s0_z0_p0_a0_625-621-4_WTL_gb_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics 

    _70-150 Small span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected. 

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-621-4 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

  • LIGNO® Uni Q3  |  Wall component 

    Produktkode: LIGNO® Uni Q3_110_625_NSi_gb_b0
    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Element height

    _110 mm 

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625 

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _NSi Industrial quality

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

  • LIGNO® Uni Q3-HL  |  Wall component

    Produktkode: LIGNO® Uni Q3-HL_123_625_NSi_gb_b0
    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Element height

    _123 mm 

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _NSi Industrial quality

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

Reference-related

Downloads

Project participants

  • Gerhard Stolz Architekten & Ingenieure

    Architect

    Hofstraße 31

    73272 Neidlingen
     

    www.ing-stolz.de

  • Zimmerei Krämer GmbH & Co. KG

    Execution

    Hülenbergstraße 35
    72622 Nürtingen

    www.kraemer-holzbau.de

  • Fotografie Uwe Röder

    Photographer

    Murgtalstraße 44
    76476 Bischweier

     

    www.fotografie-roeder.de

  • Related references

      Apartment building in the Riedpark

      Wood stands the test: fire protection, sound insulation, earthquake resistance - modern wooden buildings have...

      79787 Lauchringen

      View
        titleKüche eines Mehrfamilienhauses in Holzbauweise mit Akustikdecken LIGNO® Akustik light und gipsbekleideten Wandelementen LIGNO® Uni | Mehrfamilienhaus Riedpark Lauchringentitletitletitletitletitletitle

      Highest timber construction in South Baden 

      Special solutions for multi-storey construction with wood allow the building material to be used...

      79539  Lörrach

      View
        titletitletitletitletitletitle