Shop page iconDownload page icon

Choose your language

Highest timber construction in South Baden

Redensification with high residential value: ecological wood fibre insulation and optimised sound insulation measures make it possible 

Dieser Neubau in Holzbauweise hält hohen Brandschutzauflagen stand und bietet durch die Verwendung natürlicher Bau-und Dämmmaterialien höchsten Wohnkomfort.
Die verbauten LIGNO® Brettsperrholz - Rippendecken sind mit ihrer astfreien Sichtholzoberfläche aus Weißtanne ein optisches Highlight in den neuen Wohnungen.
Die verwendeten LIGNO® Rippe Q3 - Elemente punkten durch Feuerwiderstand, Schalldämmung und Trittschallschutz und sorgen mit ihrer edlen Oberfläche für eine warme Raumatmosphäre.
Die weiten, hellen Wohnräume versprechen höchsten Wohnkomfort, unter anderem durch die verbauten LIGNO® Bauteile, welche mit ihrer Sichtseite in edler Weißtanne eine angenehme Wohnatmosphäre kreieren.
Die verbauten LIGNO® Dachbauteile mit ihrer Sichtseite aus heimischer Weißtanne verströmen durch ihre astreine Oberfläche keineswegs einen rustikalen Charakter, sondern wirken elegant und zeitlos.
Die dunklen Fensterrahmen, Decken und Böden in angenehmem Holz und helle Wände sorgen für ein harmonisches Zusammenspiel.

The multi-family house with five residential units is so far considered the highest wooden building in South Baden. It was completed in only five months. The spacious living-dining areas with open kitchens are the focal point of each of the three floor apartments and two maisonettes. Oak par-quet floors and ceilings in silver fir also visually enhance the good feeling of living in a healthy wooden house. 

Configuration overview

Components used

  • LIGNO® Rippe Q3  |  Ceiling component

    Produktkode: LIGNO® Rippe Q3_230-290_r0_ssp_z53_p0_a0_625-51-1_WTE_gb_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _r0 Open, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _230-290 Medium span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z53 REI 60 High fire resistance

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.  

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-51-1 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTE Silver fir, economy

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

  • LIGNO® Block Q  |  Roof component

    Produktkode: LIGNO® Block Q_70-150_rg0_s0_z0_p0_a0_625-51-1_WTE_gb_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _70-150 Low span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected. 

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-51-1 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTE Silver fir, economy

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

Reference-related

Downloads

Project participants

  • wilhelm und hovenbitzer Freie Architekten BDA 

    Architect

    Bergstraße 24A
    79539 Lörrach
     

    www.wilhelm-hovenbitzer-partner.com

  • Holzbau Bruno Kaiser GmbH

    Execution

    Gewerbegebiet Gässle 7
    79872 Bernau im Schwarzwald

    www.holzbau-bruno-kaiser.de

  • Dieter Ertel Photographie 

    Photographer

    Rohrbacher Str. 28 b
    96271 Grub am Forst

     

    www.dieterertel.com

  • Lignotrend Produktions GmbH

    Photographer

    Landstraße 25
    79809 Weilheim

     

    www.lignotrend.de

  • Related references

      Apartment building in the Riedpark

      Wood stands the test: fire protection, sound insulation, earthquake resistance - modern wooden buildings have...

      79787 Lauchringen

      View
        titleKüche eines Mehrfamilienhauses in Holzbauweise mit Akustikdecken LIGNO® Akustik light und gipsbekleideten Wandelementen LIGNO® Uni | Mehrfamilienhaus Riedpark Lauchringentitletitletitletitletitletitle

      Apartment house in Hofmatt

      Wood holds its own: fire protection, sound insulation, earthquake resistance - modern wooden buildings made of LIGNO®...

      4417 CH-Ziefen

      View
        titletitletitletitletitletitletitle