Shop page iconDownload page icon

Choose your language

Guest house Camere d'aria

Maximum comfort in a renovated building from the 20th century.

Die verbauten Wand-und Deckenbauteile made of LIGNO® wurden im Inneren verputzt, sodass ein einheitliches Erscheinungsbild entsteht, dominiert von gedeckten Grautönen.
Das dunkelgraue Bett des Hotelzimmers wird eingerahmt von zwei, als Nachtisch dienenden, betthohen Holzstämmen.
Der moderne Stuhl in Senfgeld bildet einen farblichen Akzent in dem ansonsten in gedeckten Naturtönen gehaltenen Hotelzimmer.
Die skulpturhafte Wand am Raumende bildet einen warmen und dynamischen Kontrast zu den glatten hellgrauen Wänden dieses Raums.
Diese Sitzgruppe in sanften Herbsttönen wird in Szene gesetzt durch eine an der Wand montierte Leuchte.
Der lange Esstisch verleiht diesem, in grau und weiß gestalteten Raum, mit seiner Holzoberfläche eine warme Komponente.
Dieses Hotelzimmer wird dominiert von kalten Blautönen, welche durch das Holz der Baumstumpf-Nachtischchen aufgebrochen wird.
In den Hotelzimmern sollen sich die Gäste rundum wohl fühlen und unterstützen gleichzeitig die nachhaltige Bauweise made of LIGNO®.
In diesem Hotelzimmer direkt unter dem Dach ist die Unterseite des verbauten Dachbauteils made of LIGNO® aus astreiner Weißtanne sichtbar, was im Zimmer als edles Designelement dient.
Die verbauten LIGNO® Decken-und Wandbauteile wurden in diesem Hotelzimmer verputzt und in hellem Blau-und Grau gestrichen.
Eine Leiter führt in diesem Hotelzimmer hoch in die Galerie, wo sich ein weiteres Bett befindet.
Die Galerie bietet Platz für einen dritten Übernachtungsgast in dem Doppelzimmer.
Kleine Details beweisen den Bedacht mit welchem die Hotelzimmer gestaltet wurden: Hier ein in Holz gerahmtes Bild, welches die Farben des darunterliegenden Wandabschnitts auffasst.
Ein Wandabschnitt aus Holz bricht die ansonsten dunkelblau befliesten Wände auf.
Hohe Decken in Holz geben diesem mit weißen Fliesen eingekleideten Badezimmer Weite.
Die kreisförmigen Leuchten, zusammen mit der Echtholzdecke made of LIGNO® in Weißtanne, verleihen diesem Hotelzimmer eine dynamische Atmosphäre.
Die Sichtseite der Dachbauteile made of LIGNO® verleihen diesem Hotelzimmer mit ihrer edlen Weißtannenoberfläche einen besonders wohnlichen Charakter.
Dieses Klimaholzhaus made of LIGNO® steht im Einklang mit der Natur und sorgt gleichzeitig für maximales Wohlbefinden seiner Gäste.

This building, constructed at the beginning of the 20th century, originally consisted of four floors and an attic that was no longer habitable. As part of the project, all floors, with the exception of the first floor, were extensively renovated in terms of architecture, construction and energy efficiency. The newly created rooms are now part of the Camere d'Aria guest house. It was important to the client that this guest house was characterized by a hospitality that focused on both the well-being of its residents and the promotion of the local community. Sustainability was therefore of great importance and one of the reasons for choosing materials made of LIGNO®. One of the basic ideas behind the project was not to harm anyone with the construction, but on the contrary to contribute to the creation of a better world!

Configuration overview

Components used

  • LIGNO® Block Q3  |  Roof component

    Produktkode: LIGNO® Block_Q3_150-210_rg0_smw_z0_p0_a0_625-621-4_WTL_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics 

    _150-210 Small span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-621-4 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

  • LIGNO® Block Q  |  Roof component

    Produktkode: LIGNO® Block_Q_70-150_rg0_s0_z0_p0_a0_625-621-4_WTL_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _70-150 Low span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile

    _625-621-4 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

  • LIGNO® Uni Q3  |  Wall component 

    Produktkode: LIGNO® Uni Q3_110_625_NSi_gb_b0
    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Element height

    _110 mm 

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile

    _625 

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _NSI Industrial quality

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

  • LIGNO® U*psi  |  Insulation joist

    Produktkode: LIGNO® U*psi F_g_240
    Insulation joist


    The lower the U-value of a component and the lower the psi value of the details, the less heat is lost. This is precisely where the U*psi® cross-laminated timber insulating uprights from Lignotrend come into effect: They implement high insulating thicknesses in natural timber and minimise thermal bridges.

    Insulation joist

    Wood fibre as chamber separation

  • LIGNO® U*psi  |  Insulation joist

    Produktkode: LIGNO® U*psi S_n_200
    Insulation joist


    The lower the U-value of a component and the lower the psi value of the details, the less heat is lost. This is precisely where the U*psi® cross-laminated timber insulating uprights from Lignotrend come into effect: They implement high insulating thicknesses in natural timber and minimise thermal bridges.

    Insulation joist 

    Fleece as chamber separation

Reference-related

Downloads

Project participants

  • Zeropositivo Architetti 

    Architect

    Via Fratel Teodoreto 1/H

    IT - 10135 Torino 

     

    www.zeropositivoarchitetti.com/

  • STRUTTURA7 

    Architect

    Via Del Prete 123

    IT - 47841 Cattolica

     

    struttura7.it/

  • GUERRA srl industria di costruzioni 

    Execution

    Via Del Prete 123
    IT - 47841 Cattolica

     

    www.guerrasrl.info/

  • Tommaso di Bert  

    Photographer
  • Related references

      Holiday home on Lake Neukloster

      Four walls, large windows, a roof and lots of light wood: architecture can be so simple and just...

      23992 Nakenstorf

      View
        titletitletitletitletitletitletitletitle

      Bergwelt Kandel

      This hotel is situated in an exposed location at an altitude of 1,241 m in the Southern Black Forest Nature Park, with a...

      79183 Waldkirch 

      View
        Brettsperrholz-Kastenelemente made of LIGNO® aus regionaler Weisstanne wurden für das Dach des Neubaus verwendet. In diesem eleganten Speisesaal herrscht auch bei viel Umtrieb eine gute Raumakustik, dank integriertem Absorber in den Dachbauteilen. Die Dachbauteile made of LIGNO® wurden aus regionaler Weisstanne gefertigt und sorgen durch integrierten Absorber zusätzlich für eine gute Raumakustik.