Shop page iconDownload page icon

Choose your language

Lamello AG

Noise reduction in production hall 

Die Dachbauteile der Halle besitzen eine  integrierte, raumakustisch wirksame Absorberlage, die für eine gute Raumatmosphäre in der großen Halle sorgt.
In einer Produktionshalle kann Lautstärke schnell die Überhand nehmen und störend werden - dafür dass dies nicht passiert, sorgen Dachbauteile mit integriertem Akustikabsorber.
Die in Weißtanne gekleideten Dachbauteile sind nicht nur raumakustisch wirksam, sondern verleihen der Produktionshalle zusätzlich Charakter.
Tragende Elemente LIGNO® Akustik Q3 klassik wurden als Brettsperrholz-Lösung in dieser Produktionshalle implementiert.
Der unter der Dachschräge liegende Sitzungsraum profitiert von dem, in den Dachbauteilen integriertem Akustikabsorber, der eine exzellente Raumakustik auch bei angeregten Diskussionen garantiert.
Die breiten Deckenleisten in heller Weißtanne dienen als prägendes Designelement in diesem Besprechungssaal und werden optisch ergänzt durch die holzfarbenen Sichtbalken.
Der weiße Pausenraum wird akzentuiert durch grüne und schwarze Stühle und die fein profilierte Akustikdecke "nature" made of LIGNO®, verleiht dem Raum einen lebhaften Charakter, bei optimaler Raumakustik.

The products manufactured by the Lamello company stand for quality, innovation and functionality. Attributes that also characterize the reno-vation of the roofs over the production halls: The load-bearing cross la-minated timber roof components, precisely prefabricated in the factory, were simply placed on the existing truss construction and were immedia-tely ready for use inside. Good room acoustics are ensured, among other things, by the integrated, room acoustically effective absorber layer. 

Configuration overview

Components used

  • LIGNO® Acoustic Q3 classic  |  Roof component

    Produktkode: LIGNO® Acoustic Q classic_Q3_150-210_rg0_s0_k50l_p0_al40g_625-105-20_WTL_gb_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without crossgrid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _150-210 Small span

    Fire resistance

     

    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected. 

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _k50l Integrated absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profilr 

    _625-105-20 Slat profile

    Holzart


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTE Silver fir knotless, patterned

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

  • LIGNO® U*psi  |  Insulation joist

    Produktkode: LIGNO® U*psi F_n_150
    Insulation joist


    The lower the U-value of a component and the lower the psi value of the details, the less heat is lost.This is precisely where the U*psi® cross-laminated timber insulating uprights from Lignotrend come into effect:They implement high insulating thicknesses in natural timber and minimise thermal bridges.

    Insulation joist 

    Fleece as chamber separation

Reference-related

Downloads

Project participants

  • Lamello AG

    Client

    Hauptstrasse 149
    CH - 4416 Bubendorf

     

    www.lamello.de

  • az Holz AG

    Execution

    Oristalstrasse 121
    CH - 4410 Liestal


    www.azholz.ch

  • Fotografie Uwe Röder

    Photographer

    Murgtalstraße 44
    76476 Bischweier

     

    www.fotografie-roeder.de

  • Related references

      Primary school with sports hall in Tarforst 

      The new primary school with multi-purpose sports hall in Trier-Tarforst emerged from a...

      54296 Trier 

      View
        Akustisch wirksame Bauteile von Lignotrend für die Sporthalle der Grundschule Tarforst in Triertitletitletitletitletitle

      Three-field sports hall 

      A certain level of loudness in the sports environment underlines the special atmosphere of...

      01157 Dresden 

      View
        titletitletitletitletitletitletitle