Restaurant "Osmans Töchter" in Berlin

Heavenly dining under the acoustic tangram

Die Gäste dürfen ihr Essen unter herabgehängten Akustik-Deckenhimmeln genießen, bestehend aus LIGNO® Akustik light herausgeschnittenen Dreiecken.

Die hier verwendeten LIGNO® Akustik-Segel bestehen aus Dreiecken, welche zuerst aus den üblichen Rechteckformaten geschnitten und dann neu zusammengesetzt wurden - eine echte handwerkliche Herausforderung!

Osmans Töchter restaurant in Charlottenburg is already the second to be opened in Berlin by operators Lale Yanik and Arzu Bulut. Gastronomy experts describe the restaurant concept as a "delicious balancing act between traditional and modern cuisine. Tried-and-tested ingredients mixed in a new way and interpreted in a modern way - this is also what Heike Brandt, who with her office studiobrandt Berlin, was engaged as interior designer for the redesign of the restaurant premises in Wielandstraße. So that guests can enjoy their daughters' delicious food in peace and quiet, she created two acoustic ceiling canopies made of LIGNO® Acoustic real wood panels above the seating areas of the split-level floor plan. What makes them special is that the canopies are composed of triangles, which were first cut from the usual rectangular formats and then reassembled. A challenge in terms of craftsmanship, especially for the carpenter: But the result is convincing - both in terms of design and acoustics!

Configuration overview

Components used

LIGNO® Acoustic light | Ceiling cladding
Produktkode: LIGNO® Acoustic light 3S_33_a70g_625-12-4_WTL-i_gb_b0
Zum Konfigurator To product page
Wood type

Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTL-i Silver fir knotless, patterned
Profile

The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-12-4 Slat profile
Structure

The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Structure
_gb Brushed
Treatment

Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Fire behaviour

Few configurations can be configured with a flame-retardant surface. This may result in a modified element structure, greater thickness or the need for measures in the area of the substructure.
Fire behaviour
_C-s2-d0 Fire retardant surface
Room acoustics

If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a70g 70 % Absorber
LIGNO® Acoustic light | Ceiling cladding
Produktkode: LIGNO® Acoustic light 3S_33_a70g_625-20-4_WTL-i_gb_b0
Zum Konfigurator To product page
Wood type

Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTL-i Silver fir knotless, patterned
Profil

The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-20-4 Slat profile
Structure

The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Structure
_gb Brushed
Treatment

Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Fire behaviour

Few configurations can be configured with a flame-retardant surface. This may result in a modified element structure, greater thickness or the need for measures in the area of the substructure.
Fire behaviour
_C-s2-d0 Fire retardant surface
Room acoustics

If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a70g 70 % Absorber