Shop page iconDownload page icon

Choose your language

Golflodge Schloss Auel
Hotel-Jewel in Wooden Construction

Auel Castle expands ensemble-protected hotel complex 
with golf lodge in sustainable Lignotrend quality

Dieses in Massivholzbauweise erbaute Gebäude auf dem Schlossareal ist ganz getreu der regionalen Tradition komplett in Schiefer gekleidet.
Die hohen Decken dieses Hotelzimmers öffnen sich bis hoch zum Dachfirst und sind an der Sichtseite im Inneren mit fein profilierten Akustikpaneelen in edler Weißtanne ausgestattet.
In diesem, bis unter den Dachfirst geöffnetem Raum, entstehen dank der Akustikverkleidung made of LIGNO® trotzdem keine unangenehmen Schallgeräusche.
Die dunkelgrauen Möbel greifen die Farbe der äußeren Schieferverkleidung auf und bilden einen reizvollen Kontrast zu der hellen Decke aus edler Weißtanne.
Die weiße, frei stehende Badewanne hebt sich klar von dem dunklen Untergrund aus Schiefer ab, der die Außenverkleidung widerspiegelt.
Die Seegras-Böden der Hotelzimmer greifen den hellen Farbton der im Deckenbereich verwendeten Weißtanne auf.
Der grüne Stuhl lockert das Farbkonzept des ansonsten in Naturtönen gehaltenen Hotelzimmers auf.
Das Akustikprofil des Decken-und Wandbereichs made of LIGNO sorgt in den Räumen der Golflodge nicht nur für ein angenehmes Raumgefühl, sondern dient auch als Designelement.

At first glance, the Golf Lodge of the Hotel Schloss Auel near Lohmar does not show its massive wooden construction. Nevertheless, the new building has been constructed as a healthy wooden house: On the outside, it is clad entirely in dark slate, keeping the building tradition of the houses in the region of Bergisches Land, while on the inside the natural material wood shows itself in its most beautiful form: in noble Black Forest silver fir.

Configuration overview 

Components used 

  • LIGNO® Rippe Q3  |  Ceiling component 

    Produktkode: LIGNO® Rippe Q3_150-210_r0_ssp_z26_p0_a50g_625-12-4_WTL_gb_b0
    Installation top 

     

    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top 

    _r0 Open, without cross grid 

    Statics 

     

    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics 

    _150-210 Small span 

    Fire resistance 

     

    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance 

    _z26 REI 30 Fire restistance 

    Cavity 

     

    Panel designs with strip profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation routing, fixtures or to improve sound absorption.Cables laid there then do not penetrate the fire-protective layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity 

    _p0 No cavity 

    Room acoustics 

     

    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics 

    _a50g Integrated absorber  

    Profile 

     

    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12-4 Slat profile 

    Wood type 

     

    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type 

    _WTL Silver fir knotless, patterned 

    Structure 

     

    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure 

    _gb Brushed 

    Treatment 

     

    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment 

    _b0 Untreated 

  • LIGNO® Block Q3  |  Roof component 

    Produktkode: LIGNO® Block Q3_70-150_rg0_s0_z0_p0_a50g_625-12-4_WTL_gb_b0
    Installation top 

     

    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top 

    _rg0 Closed, without cross grid 

    Statics 

     

    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics 

    _70-150 Low span 

    Fire resistance 

     

    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance 

    _z0 R0

    Cavity 

     

    Panel designs with strip profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation routing, fixtures or to improve sound absorption.Cables laid there then do not penetrate the fire-protective layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity 

    _p0 No cavity 

    Room acoustics 

     

    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics 

    _a50g Integrated absorber 

    Profile 

     

    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12-4 Slat profile 

    Wood type 

     

    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type 

    _WTL Silver fir knotless, patterned 

    Structure 

     

    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure 

    _gb Brushed 

    Treatment 

     

    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment 

    _b0 Untreated 

  • LIGNO® Acoustic light  |  Ceiling cladding  

    Produktkode: LIGNO® Acoustic light 3S_33_a70g_625-12-4_WTL_gb_buv
    Wood type 

     

    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type 

    _WTL Silver fir knotless, patterned 

    Profile 

     

    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12-4 Slat profile 

    Structure 

     

    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure 

    _gb Brushed 

    Treatment 

     

    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment 

    _buv UV-protection stain 

    Room acoustics 

     

    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics 

    _a70g 70 % Absorber 

  • LIGNO® Uni Q3  |  Wall component  

    Produktkode: LIGNO® Uni Q3_123_625-621-4_WTL_gb_buv
    Statics 

     

    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Element height 

    _123 mm 

    Profile 

     

    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-621-4 Closed surface 

    Wood type 

     

    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type 

    _WTL Silver fir knotless, patterned 

    Structure 

     

    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure 

    _gb Brushed 

    Treatment 

     

    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment 

    _b0 Untreated 

  • LIGNO® U*psi  |  Insulation joist 

    Produktkode: LIGNO® U*psi F_g_200
    Insulation joist


    The lower the U-value of a component and the lower the psi value of the details, the less heat is lost.This is precisely where the U*psi® cross-laminated timber insulating uprights from Lignotrend come into effect:They implement high insulating thicknesses in natural timber and minimise thermal bridges.

    Insulation joist 

    Fleece as chamber separation 

Reference-related 

Downloads

Project participants 

  • oxen Architekten

    Architect

    Stadtwaldgürtel 73C
    50935 Köln
     

    www.oxen.de

  • Schwirten & Klein Holzbau GmbH

    Execution

    Werner-von-Siemens-Straße 12
    51647 Gummersbach

    www.skholzbau.de

  • Stefan Schilling

    Photographer

    Hospeltstraße 32
    50825 Köln

     

    www.stefan-schilling.de

  • Related references 

      Single-family house made of LIGNO® in Kronach

      A new building made of LIGNO® forms the centrepiece of a small residential ensemble that is currently ...

      96317 Kronach

      View
        titletitletitletitletitletitletitle

      Nature Experience Hotel "Höchsten"

      The Höchsten mountain inn has been attracting visitors to the Wuerttemberg lookout mountain for decades....

      88636 Illmensee 

      View
        titletitletitletitletitletitletitletitletitletitletitletitle