Modern and ecological: Family builds house made of LIGNO^® in Eschenz

Planned with the landscape

CLT-Wandelemente sorgen für ein gutes Raumklima und guten Schallschutz im Einfamilienhaus

LIGNO® Uni BSP-Wandelement in nicht sichtbarer Ausführung für gutes Raumklima ohne Holzoptik

Gutes Raumklima durch nicht sichtbare Brettsperrholz-Wandelemente im Einfamilienhaus

Durch die Regulierung der Raumfeuchte sorgen die Brettsperrholz-Wandelemente für ein gutes Raumklima

LIGNO® Außenwände mit weiß verputzter Gipsbetonverkleidung regulieren die Raumfeuchte und sorgen für guten Schallschutz

Weiß verkleidete Wandelemente aus Holz von Lignotrend sorgen für guten Schallschutz und angenehmes Raumklima

Weiß verputzte Wandelemente aus CLT kommen im Flur zum Einsatz und ermöglichen einfache Montage und Leitungsführung

Großzügiges Einfamilienhaus ausgestattet mit verkleideten Brettsperrholz-Wandelementen für gutes Raumklima und Schallschutz

Die Außenwände made of LIGNO® ermöglichen einfache Montage auf der Baustelle und sorgen für guten Schallschutz und angenehmes Raumklima

Actually, Seline and Reto Russenberger had no intention of moving out of their 4.5-room flat in Stein am Rhein. But when they had the opportunity to buy a beautiful plot of land in neighbouring Eschenz on Lake Constance, they seized the opportunity and decided to build their own house. It was to be a healthy wooden house, because a good indoor climate and sustainability are very important to the couple with two small children. Together with the planners and timber construction experts from Stamm & Meyer in Schleitheim, they realised a cosy family home that was perfectly tailored to them - built as a climate-controlled timber house with walls made of cross laminated timber from Lignotrend. Ecology, quality and lasting value are thus guaranteed.

Configuration overview

Components used

LIGNO® Uni Q3 | Wall component
Produktkode: LIGNO® Uni Q3_110_625_NSi
Zum Konfigurator To product page
Statics

The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.
Element height
_110 mm
Profile

The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625
Wood type

Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_NSI Industrial quality
LIGNO® U*psi | Insulation joist
Produktkode: LIGNO® U*psi Fg_200
Zum Konfigurator To product page
Insulation joist

The lower the U-value of a component and the lower the psi value of the details, the less heat is lost. This is precisely where the U*psi cross-laminated timber insulating uprights from Lignotrend come into effect: They implement high insulating thicknesses in natural timber and minimise thermal bridges.
Insulation joist
Fleece as chamber separation