Sportshal med tre baner
Skolesport kan også gøres stille og roligt
Trefeltshallen har et samlet sportsareal på 45 m x 27 m med en fri rumhøjde på 7 m. Den bærende konstruktion består af en armeret betonkonstruktion, hvorpå der er placeret 32 m lange træspær, som bærer taget uden søjler. Selve den tagbærende skal består af kasseelementer af krydslamineret træ, der som hallens tag opfylder flere opgaver i én komponent: Ud over den statiske funktion som afstivende skal er der også den rumakustiske funktion.

Efter at Cotta blev indlemmet i Dresden i 1903, gjorde det voksende indbyggertal det nødvendigt at bygge en ny skole. Samme år begyndte byen at bygge skolekomplekset, som nu er en fredet bygning, under ledelse af arkitekten Hans Erlwein. I begyndelsen af det 20. århundrede var Cotta Gymnasium, som det kendes i dag, den største og mest moderne grundskole i Sachsen med 64 klasseværelser til 3.000 elever.
Den nye gymnasieidrætshal, som i øjeblikket er den største skoleidrætshal i Dresden, er også en superlativ. Takket være sin placering og sine dimensioner er den nye hal en komplementær komponent i det samlede ensemble. Den udvider uderummet ind i den lukkede skolegård. Weimar-kontoret af Junk & Reich Architekten BDA Planungsgesellschaft mbH er ansvarlig for design og planlægning i et joint venture med Hartmann + Helm Planungsgesellschaft mbH, Weimar.
Arkitektur for korte afstande
Den delbare trefeltshal har et samlet sportsareal på 45 m x 27 m med en fri rumhøjde på 7 m. Den separate gymnastiksal over omklædningsrummene måler 15 m x 27 m og er 5,50 m høj. På langsiden åbner den nye halbygning sig i jordhøjde mod skolegården. En tilbygning med tilhørende rum er forbundet på østsiden. Transparente facadeområder giver mulighed for udsyn mellem sportshallen og skolegården.
Halbygningens facade understreger konceptet med den rolige, reducerede store form og består i den øverste del af en vandret struktureret pladebeklædning af fibercementplader i forskellige farvenuancer. Den omgivende sokkelzone består af skiftevis glas og lodret strukturerede gipsoverflader. Af sportslige årsager og for at optimere den bærende konstruktion blev vinduespartierne i slagvægsområdet reduceret til et minimum og anbragt skiftevis med flugtdørene. Klare strukturer med entydig rumfordeling sikrer korte afstande og giver god orientering inde i bygningen.
Læg den på toppen, og du er færdig!
Beslutningen om et valmtag med en flad hældning på fire sider understøtter bygningsstrukturens klarhed, som allerede er tydelig i plantegningen. Den udvendige afvanding og udeladelsen af en brystningsløsning muliggør en konstant højde hele vejen rundt for den øverste ende med en reduceret bygningshøjde.
Hallens bærende struktur består af en armeret betonkonstruktion, som delvist blev realiseret ved hjælp af in situ-beton og semi-præfabrikerede elementer. 32 meter lange limtræsbjælker, der er placeret på tværs af de armerede betonvægge, bærer taget uden søjler. Selve den tagbærende skal består af Lignotrend krydslaminerede trækasseelementer af typen LIGNO® Akustik Q3 klassik.
Som halltag opfylder de flere funktioner i én komponent: Ud over den statiske funktion som panel og afstivende rude har de massive træelementer også en rumakustisk funktion takket være en integreret træfiberabsorber. Sidstnævnte er afgørende for at reducere efterklangen i hallens store volumen og for at sænke det støjniveau, der genereres under brug. Uden en absorbent kan støjniveauer på 80 dB og derover nemt nås i skoleidrætsfaciliteter - niveauer, hvor der skal tilbydes høreværn i henhold til retningslinjerne for sundhed og sikkerhed.
Både krydslaminerede træelementer og akustiske absorbenter fra Lignotrend opfylder høje krav til bygningsbiologi. Deres natureplus-certifikat bekræfter, at de overholder retningslinjer, der ligger langt over de nuværende lovkrav med hensyn til fraværet af skadelige emissioner.
Harmonisk farve- og materialekoncept
Der Material- und Farbklang der großen Sporthalle wird von der Holzprallwand und den Sichtbetonflächen der aufgehenden Wände gebildet. Dazwischen spannt sich der Sportboden, dessen Farbwirkung durch eine homogene PUR- Beschichtung ohne Marmorierung her-gestellt worden ist. Dominiert wird der Innenraum der Sporthalle von den weiß lasierten Brettschichtholzbindern und den großflächigen Oberlichtbändern, die durch eine spezielle Verglasung für eine nahezu blendfreie und gleichmäßige Ausleuchtung des Raumes sorgen.
Die darauf aufliegende Dachtragschale mit ihrer astfreien Holzoberfläche in Brettstreifenoptik korrespondiert mit den Farbtönen der Prallwände. Die endfertige Oberfläche aus Weißtannenholz-streifen entstand direkt bei der Rohbau-Montage der großformatigen Dachplatten (bis zu 2,50 m x 18 m). Die Fertigstellung des Halleninnenraums wurde dadurch deutlich beschleunigt, denn Ausbauarbeiten im Sinne von Abhangdecken waren im Neubau überflüssig. Am Hallenrand wurden über der Empore die Lignotrend-Elemente in Spezialausführung ohne Absorber ausgeführt. Die offenen Fugen werden hier als unauffälliger Auslass für die Lüftung verwendet. In der kleineren Turnhalle wurde die Dachkonstruktion verkleidet. Hier verwendeten die Planer Lignotrend-Akustikpaneele LIGNO® Akustik light mit schmalen Weißtannenleisten als Untersicht.
Oversigt over konfiguration
Anvendte komponenter
LIGNO® Acoustic light | Loftsbeklædning
Produktkode: LIGNO® Acoustic light 3S_62_a50g_625-23-8_WTE_gb_b0Wood type
Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTE Silver fir, economy
Profile
The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.
Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-23-8 Slat profile
Structure
The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Structure
_gb Brushed
Treatment
Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Room acoustics
If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a50g 50 % Absorber
LIGNO® Acoustic Q3 classic | Roof component
Produktkode: LIGNO® Acoustic Q3 classic_230-290_rg0_sze_k50g_p0_al40g_625-105-20_WTE_gb_b0Statics
The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.
Statics
_230-290 Medium span
Fire resistance
If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.
Fire resistance
_z0 R0
Room acoustics
If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a50g Integrated absorber
Profile
The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.
Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-105-20 Slat profile
Wood type
Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTE Silver fir, economy
Treatment
Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
LIGNO® Acoustic Q3 classic | Roof component
Produktkode: LIGNO® Acoustic Q3 classic_150-210_rg0_s0_k50g_p0_al40g_625-105-20_WTE_gb_b0Statics
The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.
Statics
_150-210 Small span
Fire resistance
If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.
Fire resistance
_z0 R0
Room acoustics
If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a50g Integrated absorber
Profile
The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.
Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-105-20 Slat profile
Wood type
Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTE Silver fir, economy
Treatment
Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Reference-relateret
Downloads
Deltagere i projektet

Landeshauptstadt Dresden

Junk & Reich Architekten BDA Planungsgesellschaft mbH
Elbchaussee 93
D-22763 Hamburg

Hartmann + Helm Planungsgesellschaft mbH
Nordstraße 21
99427 Weimar

müllerblaustein HolzBauWerke GmbH
Pappelauer Str. 51
89134 Blaustein
www.muellerblaustein.de

Hartmann+Helm
Relaterede referencer
Primary school with sports hall in Tarforst
The new primary school with multi-purpose sports hall in Trier-Tarforst emerged from a...
54296 Trier
ViewLycée Vauban
Reception and teaching areas, library, gymnasium and sports hall, refectory, day care centre and village hall: the campus...
1484 LUX-Luxembourg
View