Shop page iconDownload page icon

Choose your language

New Friedrichshafen Trade Fair

Acoustic element at the trade fair in Friedrichshafen 

Die eindrucksvolle Fassade mit abgerundetem Dach weckt Neugier auf die Innenarchitektur der Messehallen, welche dem Äußeren in nichts nachsteht und mit einem Höchstmaß an Flexibilität punktet.
Auf ein rautenförmiges Flächentragwerk wurden in der Messehalle vormontierte, selbsttragende LIGNO® Akustikelemente angebracht, die eine angenehme Akustik in dem großen Raum garantieren.
Die in den Deckenelementen integrierte Absorberdämmung und die spezielle Profilierung sorgten für optimale Luftschall-und Absorptionswerte.

In May 2000, Baden-Württemberg's Minister President Erwin Teufel laid the foundation stone for Friedrichshafen's largest construction project: the New Friedrichshafen Trade Fair Center. 
A total of nine exhibition halls including a small event hall and a large multi-purpose hall with a total hall area of 58,300 square meters will be built on the 38-hectare site. 

Configuration overview

Components used

  • LIGNO® Acoustic Q classic  |  Roof component

    Produktkode:LIGNO® Acoustic Q classic_Q3_70-150_rg0_s0_k50l_p0_al40g_625-95-30_WTL_gb_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without crossgrid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _70-150 Small span

    Fire resistance

     

    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected. 

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _k50l Integrated absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-95-30 Slat profile

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTE Silver fir knotless, patterned

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

Reference-related

Downloads

Project participants

  • Architekten von Gerkan, Marg und Partner

    Architect

    Rainvilleterrasse 4
    22765 Hamburg
     

    www.gmp-architekten.de

  • merz kley partner ZT GmbH 

    Engineer

    Sägerstraße 6
    AT - 6850 Dornbirn

     

    www.mkp-ing.com

  • Holzbau Amann GmbH

    Execution

    Albtalstraße 1
    79809 Weilheim

    www.holzbau-amann.de

  • Frank Herlet

    Photographer

    Hugo-Eckener-Straße 29
    50829 Köln

     

    www.frank-herlet.com

  • Jürgen Schmidt Fotografie

    Photographer

    Ürdinger Straße 15
    50733 Köln

     

    www.juergen-schmidt-fotografie.de

  • Related references

      Primary school with sports hall in Tarforst 

      The new primary school with multi-purpose sports hall in Trier-Tarforst emerged from a...

      54296 Trier 

      View
        Akustisch wirksame Bauteile von Lignotrend für die Sporthalle der Grundschule Tarforst in Triertitletitletitletitletitle

      Three-field sports hall 

      A certain level of loudness in the sports environment underlines the special atmosphere of...

      01157 Dresden 

      View
        titletitletitletitletitletitletitle

      Production hall of 
      Lamello AG 

      The products that the Lamello company manufactures stand for quality, innovation and...

      4416 CH-Bubendorf 

      View
        Dachscheibe mit Akustikprofil für die Produktionshalle von Lamello in Bubendorftitletitletitletitle