Ziegelhütte Inn

Acoustic cladding in pine and white fir emphasize the charm of this historic barn

Der Traditionsgasthof Ziegelhütte in Schaffhausen wurde 2021 nach Abriss neu erbaut, wobei nur die historische Scheune erhalten blieb.

Die Decken der Gaststube sind über den Tragbalken der Holzkonstruktion mit Akustikpaneelen LIGNO® Akustik nature aus Zirbenholz verkleidet, deren ästiges Bild zusammen mit der unregelmäßigen Leistenanordnung sehr naturnah sind.

Die LIGNO® Akustikpaneele aus Zirbenholz sind nicht nur charakterisierend für das Innendesign des Gasthofs, sondern garantieren auch eine hohe Ruhequalität im Gastraum.

Dieser urige Speisesaal überzeugt mit einer Deckenverkleidung LIGNO® Akustik light in lebhaftem Zirbenholz, welche für eine optimale Raumatmosphäre sorgt.

Helle Holzleisten in astreiner Weißtanne sorgen in diesem Gastraum für eine angenehme Raumatmosphäre durch integrierten Absorber.

Die LIGNO® Akustik light Deckenverkkleidung dient hier gleichzeitig als edles Designelement und Lärmabsorber.

In diesem Sitzungssaal garantieren Akustikpaneele von Lignotrend dass es auch bei angeregten Diskussionen nie zu störenden Lautstärken im Raum kommt.

Die helle Deckenverkleidung mit LIGNO® Akustik light fügt sich wunderbar in das urige Innendesign des Gasthofs ein und sorgt gleichzeitig für eine gute Raumatmosphäre.

Die bodentiefen Fenster dieses Saals sorgen zusammen mit der hellen Akustikverkleidung von Lignotrend für eine freundliche Raumatmosphäre.

Die Decken sind zwischen den Tragbalken der Holzkonstruktion mit Akustikpaneelen LIGNO® Akustik nature aus Zirbenholz ausgestattet.

The traditional Ziegelhütte guest house in Schaffhausen was rebuilt in 2021 after demolition – only the historic barn from 1834 was preserved. In addition to the cosy dining room with fireplace, the restaurant has two further „Stübli“ for dining and private parties. In addition, there is a large hall for groups and a seminar room. Visible brickwork and lots of wood create a rustic interior ambience: the ceilings are clad above the supporting beams of the timber construction with LIGNO® Acoustic nature acoustic panels made of arolla pine wood, whose knotty appearance together with the irregular strip arrangement looks very close to nature. Both in the small rooms and especially in the large rooms, they ensure good room acoustics and less noise disturbance – even when fully occupied.

Configuration overview

Components used

LIGNO® Akustik light | Ceiling cladding
Produktkode: LIGNO® Akustik light 3S_33_a70g_625-12n25-4_ZI-ä_gb_b0
To configurator To product page
Wood type

Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_ZI-ä Stone pine with knots
Profile

The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-12n25-4 Slat profile "nature"
Structure

The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Structure
_gb Brushed
Treatment

Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Room acoustics

If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a70g 70 % Absorber
LIGNO® Akustik light | Ceiling cladding
Produktkode: LIGNO® Akustik light 3S_33_a70g_625-12n25-4_WTL_gb_b0
To configurator To product page
Wood type

Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTL Silver fir knotless, patterned
Profile

The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-12n25-4 Slat profile "nature"
Structure

The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Structure
_gb Brushed
Treatment

Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Room acoustics

If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a70g 70 % Absorber
LIGNO® Akustik light | Ceiling cladding
Produktkode: LIGNO® Akustik light 3S_39_a70g_625-12n25-4:3D_WTL_gb_b0
To configurator To product page
Wood type

Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTL Silver fir knotless, patterned
Profile

The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-12n25-4:3D Slat profile "nature"
Structure

The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Structure
_gb Brushed
Treatment

Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Room acoustics

If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a70g 70 % Absorber