IT'S A MATCH
The matching accessories are also available from Lignotrend
Connectors, fillings, termination strips and much more: For the use of our elements, we supply you with suitable accessories as required. Select product and category in the accessories filter: In this way, you can find out in no time which suitable materials and equipment we offer you for your construction task.
Edge strips with fold, silver fir
Visually appealing edge termination on free edges of ceiling and wall claddings.
Available in various types of wood, treatments, heights and fold widths.Product affiliation acoustic claddingFilter category edge terminationTypes of wood and treatment options
- Silver fir patterned, untreated
- Silver fir patterned, untreated, B-s2-d0
- Silver fir patterned, oiled
- Silver fir patterned, oiled, B-s2-d0
- Silver fir patterned, lacquered
- Silver fir patterned, lacquered, B-s2-d0
- Silver fir plain, untreated
- Silver fir plain, oiled
- Silver fir plain, lacquered
Height
- H 63 mm x L 2970 mm
- H 92 mm x L 2970 mm
- H 110 mm x L 2970 mm
Thickness depending on the selected fold width
- 2 mm fold - 14 mm thickness
- 3 mm fold - 15 mm thickness
- 4 mm fold - 16 mm thickness
For the exact definition of the slat, a sketch must be enclosed when ordering.
Edge strip with fold, oak
Visually appealing edge termination on free edges of ceiling and wall claddings.
Available in various treatments, heights and fold widths.Product affiliation acoustic claddingFilter category edge terminationTypes of wood and treatment options
- Oak untreated
- Oak oiled
- Oak lacquered
Height
- H 63 mm x L 2970 mm
- H 92 mm x L 2970 mm
- H 110 mm x L 2970 mm
Thickness depending on the selected fold with
- 2 mm fold - 14 mm thickness
- 3 mm fold - 15 mm thickness
- 4 mm fold - 16 mm thickness
For the exact definition of the slat, a sketch must be enclosed when ordering.
ProClima vapour barrier DA Connect
Weatherable vapour barrier and air sealing membrane for roof insulation with self-adhesive zones.Product affiliation roof component, wall componentFilter category air sealVapour barrier and air sealing membrane on formwork under rafter insulation
Properties
- sd value 1.3 m [water vapour diffusion resistance]
- Simple and secure bonding thanks to integrated adhesive edge strips
- Water-repellent and waterproof
Dimensions
- L 50 m x 1,50 m
Natural limestone gravel: injection service
Filled directly from the silo vehicle, with specialist and coordination on site.Product affiliation ceiling componentFilter category insulationInjection service for limestone gravel for optimised sound insulation
- Rational filling from the silo vehicle
- Cost assurance through flat rate
- Optimised processes, experienced employees
- Practically dust-free process
Natural limestone gravel in container, air-dry
Filling of ceiling elements with limestone gravel for impact sound insulation, especially in the low-frequency range. Available as bagged goods or loose in a big bag.Product affiliation ceiling componentFilter category insulationLimestone gravel fillings for optimised sound insulation
Limestone gravel as bagged goods
- air-dry, max. residual humidity 5.0 %
- grain size approx. 2.8 - 4 mm
- approx. 25 kg/sack [pallet of 42 sacks = 1.05 t]
Limestone gravel loose in big bag
- air-dry, max. residual humidity 5.0 %
- grain size approx. 8 mm
- approx. 955 kg/big bag
Thermal insulation ex works for box elements
In the case of the box element, inter-web spaces can be filled with thermal insulation (cellulose, mineral fibre) ex works.Product affiliation roof componentFilter category insulationProperties
- Reliable, complete filling
- Savings on height
- Observe building physics
All-round adhesive tape with non-woven tape
Weatherable and airtight bonding of roof and renovation vapour barriers as well as air sealing membranes.Product affiliation roof component, wall componentFilter category air sealProperties
- Suitable for outdoor and indoor use
- Durable and tight bonding
- Supple non-woven tape, can be torn off by hand
- For airtight connections according to DIN 4108-7, SIA 180 and OENORM B 8110-2
Dimensions
- L 30 m x W 6 cm
UV-protection stain “Lignovit UV 100”
Water-thinnable, breathable wood stain without active ingredients for indoor use. Contains effective light protection agents for the absorption of UV radiation and stabilisation of the wood component lignin.Product affiliation all productsFilter category treatmentLight protection agent for absorption of UV radiation
Properties
- Water-based, thin-layer glaze for indoor use based on an acrylate emulsion
- Absorption of UV radiation and stabilisation of the wood component lignin
- Transparent and matt adjustment ensures a natural appearance for softwoods
- High breathability – healthy indoor climate
- Free of chemical wood preservatives
Application
- Brush, roller, spray, Vacumat
- Yield: approx. 10 - 12 m²/l
- Do not use below +10 °C
- High air humidity and/or low temperatures delay drying
Pfetex purlin connection web
Anti-slip, transparent and self-adhesive purlin connection web for easy connection to vapour barrierProduct affiliation roof componentsFilter category air sealSelf-adhesive special film with non-slip structure and high continuous adhesive strength
Properties
- Anti-slip even in wet conditions
- Transparent - therefore easy fitting to the rafters
- Stability due to tear resistance and compressive strength
- Simple and fast application due to self-adhesive ends
- High ageing resistance - the adhesive can neither dry out nor become brittle
Dimensions
- L 25 m x H 57 cm
- 4 rolls/package
- Weight approx. 207 g/m
- Adhesive tape thickness 0.45 mm
Universal lifting clamp
LIGNO® lifting clamp for mounting ceiling or roof element strips without damaging the visible surface.Product affiliation ceiling component, roof componentFilter category installationLIGNO® universal lifting clamp
Properties
- Adaptable to the various necessary gripping widths
- Two clamps required per element
- For loan or purchase
Würth transport anchor
The transport anchor allows the safe and simple lifting of timber components made of LIGNO®. An expert’s report is available for the ASSY 4 Combi T transport anchor screw or ASSY 3.0 combination screw.Product affiliation ceiling component, roof component, wall componentFilter category installationTransport anchor with chain link and stop on the crossmember
Properties
- Load capacity 1.3 t
- Galvanised surface
- Material: steel
Dimensions
- Stirrup length: 165 mm
- Internal width: 40 mm
Edge board 8 mm plywood
Edge boards for front end element termination
Product affiliation ceiling componentFilter category edge terminationProperties
- Material: plywood
- Installation on site
Dimensions
- Thickness: 8 mm
- Length: 2500 mm
- Height dependent on element type
Screws for LIGNO® Acoustic light and Sport / 3.5 x 40 mm
Screws for the concealed installation of acoustic claddings on timber substructuresProduct affiliation acoustic claddingFilter category connectorSPAX full-thread screw incl. screwdriver bit
for timber substructures of LIGNO® Acoustic light 3S-33Properties
- Full-thread screw with cylindrical head
- Stainless steel A4
- 4-cut tip
- Package contents: 200 pcs incl. screwdriver bit
(one Torx special bit with extended tip per package) - Requirement per m2 approx. 10 pieces
Dimensions
- 3.5 x 40 mm
- Head diameter 4 mm
(ideal for concealed fastening through 4 mm acoustic gap)
Screws, highly corrosion resistant,
for LIGNO® Acoustic light / 3.5 x 43 mm
Highly corrosion-resistant screws for the concealed installation of acoustic claddings in rooms with increased humidity or atmosphere containing chlorine.Product affiliation acoustic claddingFilter category connectorScrews for concealed fastening, incl. screwdriver bit
for LIGNO® Acoustic light 3S-33 (e.g. in indoor swimming pools)Properties
- Special screw with countersunk head
- Highly corrosion-resistant steel material 1.4539
(fastener for indoor swimming pools - other than brine baths) - 4-cut tip
- Package contents: 200 pcs incl. screwdriver bit
(one Torx special bit with extended tip per package
Dimensions
- 3.5 x 43 mm
- Head diameter 4 mm
(ideal for concealed fastening through 4 mm acoustic gap)
Screws for sheet metal profiles,
for LIGNO® Acoustic light / 3.5 x 48 mm
Sheet metal screws for mounting acoustic claddings on metal profilesProduct affiliation acoustic claddingFilter category connectorSPAX special screw incl. screwdriver bit
for LIGNO® Acoustic light 3S-33Properties
- Full-thread screw with cylindrical head
- Steel with Wirox coating
- 4-cut tip
- Package contents: 200 pcs incl. screwdriver bit
(one Torx special bit with extended tip per package)
Dimensions
- 3.5 x 48 mm
- Head diameter 4 mm
(ideal for concealed fastening through 4 mm acoustic gap)
Substructure made of multi-layered board strips
Precise installation due to even and straight substructures. No warping due to dimensionally accurate and ground surfaces.Product affiliation acoustic claddingFilter category substructureProperties
- Multi-layered board strips C/C quality
- Guiding value for installation approx. 20 min/m²
Dimensions
- 2500 x 95 x 27 mm
Substructure made of solid timber (B-s2-d0)
Flame retardant substructure for LIGNO® Acoustic light; Fire protection classification: EN 13501-1Product affiliation acoustic claddingFilter category substructureProperties
- Dried, planed on four sides and slightly chamfered
- Indoor use GK1 + GK2 according to: EN 335, EN 14915
- Glued multiple times in thickness
- Pine or spruce
- Guiding value for installation approx. 20 min/m2
Dimenstions
- L 3000 x W 95 x H 27 mm
Substructure made of plywood strips
Strips of veneered board for impact wall substructure. The plywood strips are particularly suitable for elastic stress.Product affiliation impact wall claddingFilter category substructureDimensions
- Plywood strip 2500 x 50 x 18 mm
- Bearing blocks 50 x 50 x 18 mm
The technical values of the test certificate only be adhered to in combination with the Lignotrend impact wall substructure.
G.U.T. installation connectors
Corner connectors made of high-strength polyamide for simple and cost-effective placement of LIGNO® wall components.Product affiliation wall componentFilter category connectorProperties
- Weather-independent system
- Precise, simple placement and connection
- 50 pcs./carton
Dimensions
- L 290 x W 30 x H 175 mm
- Thickness: 34 mm
Grid ceiling blanks
Cut-to-size boards of LIGNO® Acoustic light elements for installation in grid ceiling systems.Product affiliation acoustic claddingFilter category special configurationThe LIGNO® Acoustic light 3S-33 boards can be delivered ready cut to size for insertion into grid ceilings
(e.g. from DONN profiles DX 24).Dimensions
- L 613 mm x W 613 mm (individual blanks up to max. 625 mm width on enquiry)
- Weight: 9.1 kg/m²
Fire retardant foil Interdens type 15
Flexible fire protection material for the fire-protective implementation of electrical installationsProduct affiliation wall componentFilter category fire protectionBuilding material that foams in case of fire to improve the fire resistance duration for electrical installations in LIGNO® wall components. The expansion of the building material seals cavities to prevent the spread of heat, smoke and flames.
Dimensions
- L 333 mm x W 500 mm
- L 400 mm x W 500 mm
- L 500 mm x W 500 mm
Insulating strips of soft wood fibre
Soft wood fibre insulation for LIGNO® Uni Q3 HLProduct affiliation wall componentFilter category insulationDimensions
- L 575 mm x W 155 mm x H 60
Mineral wool insulating strips
Mineral fibre insulation for LIGNO® Uni Q3 HL
Product affiliation wall componentFilter category insulationDimensions
- L 7000 mm x W 157 mm x H 80
HILTI fire protection brick CFS-BL P
Fire bulkhead for various pipes and electrical installationsProduct affiliation ceiling component, roof componentFilter category fire protectionHILTI fire protection bricks are used for the sealing of cables and pipes in piping and electrical installations. They are ideally suited for highly fibre-sensitive and dust-sensitive rooms and locations with frequently changing electrical installations such as data centres, computer rooms, hospitals, laboratories.
Advantages- Plastic label can remain on the brick (easier installation)
- Particularly suitable for subsequent laying of cables
- Can be combined with fire protection foam CP 660 (combination bulkhead)
- Cost-effective due to short installation time
- Feed-through of electrical conduits with and without cables
- Simple processing, no special tools required
- Absolutely dust and fibre-free
Dimensions
- L 200 x W 130 x H 50 mm
LIGNO® inspection flap for Acoustic light 3S-33
Aluminium frame for flush insertion of the inspection door cover -
cutting to size of an acoustic elementProduct affiliation acoustic claddingFilter category supplementary productsProperties
- 2 hex socket locks
- 2 special hinges for opening (90°), not visible when closed
- Chain guard to prevent dropping down
Installation
- Frame is mounted on 27 mm substructure and
is attached to the side of the substructure with 4 screws - Can be inserted flush in the ceiling with a 4 mm joint all round
Dimensions
- L 625 x W 625 x H 42.5 mm (internal 40.5 mm)
- Opening dimension: L 610 x W 610 mm
Wooden cover is cut to size from a normal acoustic element on site and screwed to the aluminium frame. Self-drilling screws can be used or alternatively holes can be drilled in the frame.
Cover made of acoustic elements not included in the scope of delivery.
LIGNO® inspection flap for Acoustic light 3S-33
Aluminium frame for flush insertion of the inspection door cover -
cutting to size of an acoustic elementProduct affiliation acoustic claddingFilter category supplementary productsProperties
- 2 hex socket locks
- 2 special hinges for opening (90°), not visible when closed
- Chain guard to prevent dropping down
Installation
- Frame is mounted on 27 mm substructure and
is attached to the side of the substructure with 4 screws - Can be inserted flush in the ceiling with a 4 mm joint all round.
Dimensions
- L 625 x W 370 x H 42.5 mm (internal 40.5 mm)
- Opening dimension: L 610 x W 355 mm
Wooden cover is cut to size from a normal acoustic element on site and screwed to the aluminium frame. Self-drilling screws can be used or alternatively holes can be drilled in the frame.
Cover made of acoustic elements not included in the scope of delivery.
Inspection door cover for LIGNO® inspection flap
Cutting to size of the inspection door cover from acoustic element. Available in different dimensions.Product affiliation acoustic claddingFilter category supplementary productsProperties
- Ceiling is seamed all round for LIGNO® inspection flap
- Includes 2 holes diameter 15 mm for turning locks
Installation
- Cover is screwed to inspection frame
Cutting size
- L 625 x W 599 mm or, for the smaller version,
- L 625 x W 355 mm
Disposable plastic mounting loop
For lifting LIGNO® wall components. Disposable loops are hooked into the head plate during pre-assembly. Available in different versions.Product affiliation wall componentFilter category installationInstallation
- Disposable loops are hooked into the head plate during pre-assembly
Circumference
- 80 cm
- 180 cm
Sill / head plate
Cross-laminated timber sills and head plate profile in industrial quality
Available in different dimensions.Product affiliation wall componentFilter category supplementary productsDimensions
- L 1200 mm x W 80 mm x H 80 mm
- L 1200 mm x W 80 mm x H 120 mm
- L 1200 mm x W 80 mm x H 200 mm
- L 1200 mm x W 80 mm x H 240 mm
One-ply-panel for component supplementation
Raw board sanded on one side Available in different versions.Product affiliation ceiling components, roof components, wall components, acoustic cladding, impact wall claddingFilter category edge terminationTypes of wood and dimensions
- Silver fir patterned L 2970 mm x W 1290 mm x H 40 mm
- Silver fir patterned L 2970 mm x W 640 mm x H 7.5 mm
- Silver fir patterned, PU glued
L 2960 mm x W 640 mm x H 7.5 mm - Silver fir patterned, PU glued
L 2960 mm x W 640 mm x H 13 mm - Silver fir patterned, B-s2-d0 (fire retardant) L 2970 mm x W 640 mm x H 20 mm
- Silver fir patterned L 2970 mm x W 645 mm x H 20 mm
- Silver fir patterned L 2960 mm x W 650 mm x H 7.5 mm
- Silver fir industry L 2960 mm x W 640 mm x H 7.5 mm
- Silver fir economy
L 2970 mm x W 640 mm x H 7.5 mm - Silver fir economy L 2960 mm x W 650 mm x H 7.5 mm
- Silver fir plain L 2970 mm x W 640 mm x H 7.5 mm
- Silver fir plain L 2970 mm x W 645 mm x H 20 mm
- Oak L 2970 mm x W 645 mm x H 20 mm
- Oak L 2960 mm x W 640 mm x H 7.5 mm
- Spruce A-quality L 2970 mm x W 1290 mm x H 20 mm
- Spruce knotless, plain L 2970 mm x W 640 mm x H 20 mm
Three-layer board silver fir
Knotless surface of finger-jointed slats, rift and half-rift cut, to match the pattern of the Lignotrend element surfaces in silver fir.Product affiliation ceiling components, roof components, wall components, acoustic cladding, impact wall claddingFilter category edge terminationTypes of wood and dimensions
- Silver fir patterned L 2970 mm x W 1290 mm x H 20 mm
- Silver fir patterned, B-s2-d0 (fire retardant) L 2970 mm x W 640 mm x H 21 mm
- Silver fir patterned, continuous slats L 2970 mm x W 1290 mm x H 20 mm
Compressed air staple gun
Staple gun for the concealed fastening of acoustic claddings.Product affiliation acoustic claddingFilter category installationStaple gun for the almost invisible attachment of spreader staples.
Due to the narrow foot, the base of the groove is easily reached.Properties
- Staple gun type 3428 for acoustic panels of type 3S-33 and 3G-33
- Suitable for groove widths from 4 mm
LED light strip, narrow
LIGNO® LED light strip for flush installation in acoustic claddings.Product affiliation acoustic claddingFilter category supplementary productsHigh-quality surface-mounted light made of extruded aluminium profile
Properties
- Light strip 20 mm wide
- Compatible with profile variants _625-20-4 and _625-12n25-4
- Harpoon formation 4.2 mm
- L x W x H: approx. (n x 100 + 15) x 20 x 27 mm max. length 2915 mm per element
- Diffusers made of white translucent PMMA, flush with profile
- LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V
- Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20
- Prepared for on-site connection to converters
Flush installation
LIGNO® LED light strips
Luminous intensity
in lm / mLight colour
in KelvinConnected load
in W / nDimmability 720 2 700 K
3 000 K
6 500 K8,1 DALI possible 1 200 2 700 K
3 000 K
6 500 K13,6 DALI possible 1 800 2 700 K
3 000 K
6 500 K23,8 DALI possible Converter for standard LIGNO® LED light strip
DALI Power in
WattsVoltage in V Dimensions
(L x W x H)- 50 220-240/24V 242x40x16mm - 75 220-240/24V 242x47x44mm dimmable 50 220-240/24V 346x32x22mm dimmable 80 220-240/24V 346x32x22mm dimmable 160 220-240/24V 346x50x35mm Accessoires
Connecting cable with socket and plug (GST08i275T)
Calculation
The following table serves as an orientating planning aid based on a sample room calculation –
Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
However, it is not a substitute for a detailed light calculation by an expert.
Required light strip length (lfm) Required light strip length (lfm) Required light strip length (lfm) Requirement lx/m2 Distance visual task - light source Luminous intensity 720 lm/m Luminous intensity
1200 lm/mLuminous intensity
1800 lm/mBedroom
50 lx/m21,2m (high table) 0,13 2 0,08 2 0,05 2 1,6m (work surface) 0,15 1 0,10 2 0,06 2 2,5m (floor) 0,19 1 0,13 2 0,08 2 Children's bedroom/living room/hall/stairs/storeroom/
basement
100 lx/m21,2m (high table) 0,24 1 0,15 1 0,10 2 1,6m (work surface) 0,27 1 0,16 1 0,13 2 2,5m (floor) 0,35 1 0,20 1 0,15 1 Bathroom/kitchen
150 lx/m21,2m (high table) 0,35 1 0,25 1 0,15 1 1,6m (work surface) 0,40 1 0,27 1 0,16 1 2,5m (floor) 0,50 2 0,30 1 0,22 1 Office/hobby room
300 lx/m21,2m (high table) 0,69 3 0,45 1 0,30 1 1,6m (work surface) 0,83 3 0,50 1 0,35 1 2,5m (floor) 1,05 3 0,62 2 0,45 1 Work surface (desk)
500 lx/m21,2m (high table) 1,25 3 0,75 2 0,50 1 1,6m (work surface) 1,35 3 0,83 3 0,56 1 2,5m (floor) 1,80 3 1,05 3 0,69 2 1 recommended 2 only conditionally useful 3 not useful
Example: Office/hobby room with 16 m2 floor space
- required luminous intensity approx. 300 lx/m
- Distance from light source 2.5 m
LED light strip, wide
LIGNO® LED light strip for flush installation in acoustic claddings.Product affiliation acoustic claddingFilter category supplementary productsHigh-quality surface-mounted light made of extruded aluminium profile
Properties
- Light strip 28 mm wide
- Compatible with profile variants _625-12-4, _625-12n25-4 and _625-22n40-4
- Harpoon formation 4.2 mm
- L x W x H: approx. (n x 100 + 15) x 28 x 27 mm max. length 2915 mm per element
- Diffusers made of white translucent PMMA, flush with profile
- LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V
- Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20
- Prepared for on-site connection to converters
Flush installation
LIGNO® LED light strips
Luminous intensity
in lm / mLight colour
in KelvinConnected load
in W / nDimmability 720 2 700 K
3 000 K
6 500 K8,1 DALI possible 1 200 2 700 K
3 000 K
6 500 K13,6 DALI possible 1 800 2 700 K
3 000 K
6 500 K23,8 DALI possible Converter for standard LIGNO® LED light strip
DALI Power in
WattsVoltage in V Dimensions
(L x W x H)- 50 220-240/24V 242x40x16mm - 75 220-240/24V 242x47x44mm dimmable 50 220-240/24V 346x32x22mm dimmable 80 220-240/24V 346x32x22mm dimmable 160 220-240/24V 346x50x35mm Accessoires
Connecting cable with socket and plug (GST08i275T)
Calculation
The following table serves as an orientating planning aid based on a sample room calculation –
Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
However, it is not a substitute for a detailed light calculation by an expert.
Required light strip length (lfm) Required light strip length (lfm) Required light strip length (lfm) Requirement lx/m2 Distance visual task - light source Luminous intensity 720 lm/m Luminous intensity
1200 lm/mLuminous intensity
1800 lm/mBedroom
50 lx/m21,2m (high table) 0,13 2 0,08 2 0,05 2 1,6m (work surface) 0,15 1 0,10 2 0,06 2 2,5m (floor) 0,19 1 0,13 2 0,08 2 Children's bedroom/living room/hall/stairs/storeroom/
basement
100 lx/m21,2m (high table) 0,24 1 0,15 1 0,10 2 1,6m (work surface) 0,27 1 0,16 1 0,13 2 2,5m (floor) 0,35 1 0,20 1 0,15 1 Bathroom/kitchen
150 lx/m21,2m (high table) 0,35 1 0,25 1 0,15 1 1,6m (work surface) 0,40 1 0,27 1 0,16 1 2,5m (floor) 0,50 2 0,30 1 0,22 1 Office/hobby room
300 lx/m21,2m (high table) 0,69 3 0,45 1 0,30 1 1,6m (work surface) 0,83 3 0,50 1 0,35 1 2,5m (floor) 1,05 3 0,62 2 0,45 1 Work surface (desk)
500 lx/m21,2m (high table) 1,25 3 0,75 2 0,50 1 1,6m (work surface) 1,35 3 0,83 3 0,56 1 2,5m (floor) 1,80 3 1,05 3 0,69 2 1 recommended 2 only conditionally useful 3 not useful
Example: Office/hobby room with 16 m2 floor space
- required luminous intensity approx. 300 lx/m
- Distance from light source 2.5 m
LED light strip, plug-in mounting, narrow
LIGNO® LED light strip for subsequent installation in acoustic gaps.Product affiliation acoustic claddingFilter category supplementary productsHigh-quality surface-mounted light made of extruded aluminium profile
Properties
- Light strip 20 mm wide
- Compatible with profile variants _625-20-4 and _625-12n25-4
- Coated similar to RAL 9010 incl. end caps
- Harpoon formation 4.2 mm
- L x W x H: approx. (n x 100 + 15) x 20 x 27 mm max. length 2915 mm per element
- Diffusers made of white translucent PMMA, flush with profile
- LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V
- Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20
- Prepared for on-site connection to converters
Clip-on installation
LIGNO® LED light strips
Luminous intensity
in lm / mLight colour
in KelvinConnected load
in W / nDimmability 720 2 700 K
3 000 K
6 500 K8,1 DALI possible 1 200 2 700 K
3 000 K
6 500 K13,6 DALI possible 1 800 2 700 K
3 000 K
6 500 K23,8 DALI possible Converter for standard LIGNO® LED light strip
DALI Power in
WattsVoltage in V Dimensions
(L x W x H)- 50 220-240/24V 242x40x16mm - 75 220-240/24V 242x47x44mm dimmable 50 220-240/24V 346x32x22mm dimmable 80 220-240/24V 346x32x22mm dimmable 160 220-240/24V 346x50x35mm Accessoires
Connecting cable with socket and plug (GST08i275T)
Calculation
The following table serves as an orientating planning aid based on a sample room calculation –
Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
However, it is not a substitute for a detailed light calculation by an expert.
Required light strip length (lfm) Required light strip length (lfm) Required light strip length (lfm) Requirement lx/m2 Distance visual task - light source Luminous intensity 720 lm/m Luminous intensity
1200 lm/mLuminous intensity
1800 lm/mBedroom
50 lx/m21,2m (high table) 0,13 2 0,08 2 0,05 2 1,6m (work surface) 0,15 1 0,10 2 0,06 2 2,5m (floor) 0,19 1 0,13 2 0,08 2 Children's bedroom/living room/hall/stairs/storeroom/
basement
100 lx/m21,2m (high table) 0,24 1 0,15 1 0,10 2 1,6m (work surface) 0,27 1 0,16 1 0,13 2 2,5m (floor) 0,35 1 0,20 1 0,15 1 Bathroom/kitchen
150 lx/m21,2m (high table) 0,35 1 0,25 1 0,15 1 1,6m (work surface) 0,40 1 0,27 1 0,16 1 2,5m (floor) 0,50 2 0,30 1 0,22 1 Office/hobby room
300 lx/m21,2m (high table) 0,69 3 0,45 1 0,30 1 1,6m (work surface) 0,83 3 0,50 1 0,35 1 2,5m (floor) 1,05 3 0,62 2 0,45 1 Work surface (desk)
500 lx/m21,2m (high table) 1,25 3 0,75 2 0,50 1 1,6m (work surface) 1,35 3 0,83 3 0,56 1 2,5m (floor) 1,80 3 1,05 3 0,69 2 1 recommended 2 only conditionally useful 3 not useful
Example: Office/hobby room with 16 m2 floor space
- required luminous intensity approx. 300 lx/m
- Distance from light source 2.5 m
LED light strip, plug-in mounting, wide
LIGNO® LED light strip for subsequent installation in acoustic gaps.Product affiliation acoustic claddingFilter category suppementary productsHigh-quality surface-mounted light made of extruded aluminium profile
Properties
- Light strip 28 mm wide
- Compatible with profile variants _625-12-4, _625-12n25-4 and _625-22n40-4
- Coated similar to RAL 9010 incl. end caps
- Harpoon formation 4.2 mm
- L x W x H: approx. (n x 100 + 15) x 20 x 27 mm
max. length 2915 mm per element - Diffusers made of white translucent PMMA, flush with profile
- LED illuminant, energy efficiency class A+/A++, degradation L80/b10 Connected voltage 24 V
- Flexible supply cable with 2 x 0.75 mm² and Wieland plug up to 2.8 m Protection class III; IP 20
- Prepared for on-site connection to converters
Clip-on installation
LIGNO® LED light strips
Luminous intensity
in lm / mLight colour
in KelvinConnected load
in W / nDimmability 720 2 700 K
3 000 K
6 500 K8,1 DALI possible 1 200 2 700 K
3 000 K
6 500 K13,6 DALI possible 1 800 2 700 K
3 000 K
6 500 K23,8 DALI possible Converter for standard LIGNO® LED light strip
DALI Power in
WattsVoltage in V Dimensions
(L x W x H)- 50 220-240/24V 242x40x16mm - 75 220-240/24V 242x47x44mm dimmable 50 220-240/24V 346x32x22mm dimmable 80 220-240/24V 346x32x22mm dimmable 160 220-240/24V 346x50x35mm Accessoires
Connecting cable with socket and plug (GST08i275T)
Calculation
The following table serves as an orientating planning aid based on a sample room calculation –
Room size: 16 m²; degree of reflection, ceiling and wall: 50 %, floor: 20 %.
However, it is not a substitute for a detailed light calculation by an expert.
Required light strip length (lfm) Required light strip length (lfm) Required light strip length (lfm) Requirement lx/m2 Distance visual task - light source Luminous intensity 720 lm/m Luminous intensity
1200 lm/mLuminous intensity
1800 lm/mBedroom
50 lx/m21,2m (high table) 0,13 2 0,08 2 0,05 2 1,6m (work surface) 0,15 1 0,10 2 0,06 2 2,5m (floor) 0,19 1 0,13 2 0,08 2 Children's bedroom/living room/hall/stairs/storeroom/
basement
100 lx/m21,2m (high table) 0,24 1 0,15 1 0,10 2 1,6m (work surface) 0,27 1 0,16 1 0,13 2 2,5m (floor) 0,35 1 0,20 1 0,15 1 Bathroom/kitchen
150 lx/m21,2m (high table) 0,35 1 0,25 1 0,15 1 1,6m (work surface) 0,40 1 0,27 1 0,16 1 2,5m (floor) 0,50 2 0,30 1 0,22 1 Office/hobby room
300 lx/m21,2m (high table) 0,69 3 0,45 1 0,30 1 1,6m (work surface) 0,83 3 0,50 1 0,35 1 2,5m (floor) 1,05 3 0,62 2 0,45 1 Work surface (desk)
500 lx/m21,2m (high table) 1,25 3 0,75 2 0,50 1 1,6m (work surface) 1,35 3 0,83 3 0,56 1 2,5m (floor) 1,80 3 1,05 3 0,69 2 1 recommended 2 only conditionally useful 3 not useful
Example: Office/hobby room with 16 m2 floor space
- required luminous intensity approx. 300 lx/m
- Distance from light source 2.5 m
LED converter
Converter for standard LIGNO® LED light strips.Product affiliation LED light stripesFilter category supplementary productsProperties
- Constant voltage supplies 24 V
- Suitable for indoor and outdoor installations
- Very stable output power
- High electronically reversible protection against short-circuit, overload and overtemperature
- Independent assembly possible
LED cable extension
Cable extension for standard LIGNO® LED light strips.Product affiliation LED light stripesFilter category supplementary products- Wieland plug
- maximum 10 m supply cable per LIGNO® LED light strip
Or you can call us directly: