Loft in Salzburg country

Flowing room zones with 360° view

For the living spaces of this detached house in austrian Pinzgau, which opens onto the garden with large sliding glazing, the architect Claudia Zeilhofer-Hämmerl chose LIGNO® Acoustic light cross-laminated timber acoustic panels with a classy silver fir surface as wall cladding. The very patterned „nature“ slat profile was applied to these elements in continuous wooden slats, which gives the wall surfaces a very homogeneous appearance: a great piece of nature in the middle of the dining and living room – and pleasant room acoustics at the same time!

Configuration overview

Components used

LIGNO® Akustik light | Wall cladding
Product code: LIGNO® Akustik light 3S_33_a70g_625-12n25-4_WTD_gb_b0
To configurator To product page
Wood type

Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
Wood type
_WTD Silver fir knotless, continuous lamella
Profile

The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-12n25-4 Slat profile "nature"
Structure

The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Structure
_gb Brushed
Treatment

Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
Treatment
_b0 Untreated
Room acoustics

If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
Room acoustics
_a70g 70 % Absorber