Office spaces benefit from real wood acoustic panels
Good room acoustics and sophisticated room design go hand in hand
Noise is one of the biggest disruptive and stress factors in the office. In the worst case, it can even lead to health problems. Effective acoustic solutions are therefore becoming increasingly important in modern architecture: with LIGNO® Acoustic light acoustic panels, not only can reverberation times, sound distribution and speech intelligibility in the room be effectively changed for the better, but the interior design also benefits from the elegant real wood elements. There are three profile variants to choose from: elegant, simple, regular skirting profiles, particularly natural-looking, irregular "nature" profiles or the new, very lively "nature:3D" profile.
Bombardi Tiefbau GmbH in Titisee-Neustadt decided to use acoustic panels with nature:3D profile to furnish their new office building. The irregularly high strips achieve a dynamic yet homogeneous three-dimensional effect on the ceilings.
LIGNO® Acoustic light | Ceiling claddingProduct code: LIGNO® Acoustic light 3S_39_a70g_nnu_625-12n25-4:3D_WTL_gs_b0
Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.
_WTL Silver fir knotless, patterned
The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.
Note: Some profiles indirectly cause exclusions for other configuration options.
_625-12n25-4 Slat profile "nature"
The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.
Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.
If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.
_a70g 70% Absorber
Office extension K&D
In the two-storey extension for the office of the Kommunikation & Design agency, the Focus Open 2020 gold award-winning...