Shop page iconDownload page icon

Choose your language

Single-familiy house arisdorf

Rustic oak meets elegant white fir

Der Einsatz unterschiedlicher Holzarten im gesamten Haus sorgt für ein naturnahes Wohngefühl.
Die rustikale Eiche der Bodendielen bildet einen warmen Kontrast zum hellen Ton der akustisch wirksamen Deckenverkleidung in Weißtanne.
Der Einsatz von Holz wirkt im Inneren als dominierendes Designelement und vermittelt eine warme Raumatmosphäre. Das schwarz der Kochinsel bildet einen Kontrast zu den Brauntönen.
Die lange Essentafel steht direkt gegenüber einer schaufensterartigen, quadratischen Fensterfront und gewährt den Sitzenden so einen Blick in die Natur.
Der Schwedenofen aus Stein fügt sich perfekt in das von Naturmaterialien geprägte Wohnambiente ein.
Das dunklere Braun der Holzdielen schenkt dem gesamten Innenbereich eine ruhige Wohnatmosphäre, welche durch die hohe Funktionalität der LIGNO® Akustikpaneelen noch unterstützt wird.
Die Galerie öffnet sich bis hoch in Satteldach und zwei seitliche große Fenster schenken zusätzlich Licht.
LIGNO® Akustikpaneele kleiden die Decke bis hoch zum Satteldach und bilden durch ihre feine Profilierung und die Oberfläche aus astreiner Weißtanne einen optischen Blickfang.
In dem komplett in Holz gekleideten Raum, geprägt durch Naturtöne und mit großen Fenstern ausgestattet, lädt die freistehende Badewanne zu einem besonders naturnahen Badeerlebnis ein.
Der Kochbereich bildet durch seine schwarze Verkleidung und klare kantige Linien einen dynamischen Kontrastpunkt zu den fließenden Holzoberflächen.
Die verwendeten Holzmaterialien aus rustikaler Eiche und eleganter Weißtanne setzen sich auch im Badezimmer fort. Die Materialien wirken als Verbindungselement im gesamten Haus.

The heart of this Klimaholzhaus in Arisdorf, Switzerland, is the central cooking, dining and living area. Via a gallery, it opens imposingly up to the gable roof, where the family‘s private rooms are situated. The use of different types of wood throughout the house ensures a very natural atmosphere: rustic oak for the floorboards stands next to elegant silver fir for the acoustically effective surfaces of the load-bearing LIGNO® ceiling components as well as for the walls.  

Configuration overview

Components used

  • LIGNO® Akustik light  | Ceiling cladding 

    Product code: LIGNO® Akustik light 3S_33_a70g_625-12n25-4_WTL_gb_buv
    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12n25-4 Slat profile "nature" 

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a70g 70 % Absorber

  • LIGNO® Rippe Q3  |  Ceiling component

    Product code: LIGNO® Rippe Q3_150-210_r0_s0_z26_p0_a50g_625-12n25-4_WTL_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _r0 Open, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics 

    _150-210 Small span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z26 REI 30 Fire resistance

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a50g Integrated absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12n25-4 Slat profile "nature"

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species. 

    Wood type

    _WTL Silver fir knotless, patterned

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

Reference-related

Downloads

Project participants

  • Wohlgemuth & Pafumi Architekten AG

    Architect

    Therwilerstrasse 16

    CH - 4153 Reinach

     

    www.wparch.ch/

  • Schaub AG Holzbau

    Execution

    Berstelstrasse 14

    CH - 4422 Arisdorf

     

    schaub-holzbau.ch
     

  • Martina Villiger, Holz & Funktion AG

    Photographer

    Kreuzmatt 2
    CH - 6242 Wauwil

     

    www.holzfunktion.ch

  • Related references

      Single-family house in Eschenz

      A spacious floor plan and natural materials make living in the home-healthy ...

      8264 CH-Eschenz

      View
        Ein wohngesundes Holzhaus, das sich harmonisch in die Landschaft einfügt und nicht rustikal, sondern klar und modern wirkt. titleDie direkt unter der Dachschräge liegende Küche wird durch bodentiefe Fenster lichtdurchflutet. Der dunkle Fußboden bildet einen spannenden Kontrast zur hellen Fichtenholz-Decke. Über die verbauten LIGNO® Außenwände entschieden sich die Bauherren innen für eine weiß verputzte Gipsbetonverkleidung.Die bodentiefen Fenster im Essbereich öffnen den Zugang zu einer großzügigen Terrasse. Die drei Komponenten Fichtenholz-Decke, dunkler Steinboden und weiß verputzte Wände bilden ein kontrastreiches Trio. Das großzügige Outdoor-Wohn-Deck wird über eine Treppe direkt mit dem Garten verbunden und dient so als Verbindungsglied zwischen Obergeschoss und Natur. titleDie Außenwände made of LIGNO® wurden bei diesem EFH mit einer hinterlüfteten Vorhangfassade aus edlen, grauen Faserzementplatten verkleidet.

      Single-family house made of LIGNO® in Kronach

      A new building made of LIGNO® forms the centrepiece of a small residential ensemble that is currently ...

      96317 Kronach

      View
        titletitletitletitletitletitletitle