Shop page iconDownload page icon

Choose your language

black forest Villa

Modern house ensemble made of LIGNO®

Dieses exklusive Klimaholzhaus besteht aus Wohnhaus und Badehaus verbunden durch einen eingeschossigen Zwischenbereich.
Das Leistenprofil der Decke aus regionaler Weißtanne direkt unterm Dachfirst wirkt als dominierendes Designelement im Obergeschoss.
Der Badezimmer-Bereich direkt unterm Giebel öffnet sich zu einer Galerie und wird dominiert vom hellen Holz der Weißtanne.
Bodentiefe Fenster lassen viel Licht ins Innere und betonen, zusammen mit der Akustik Light Deckenverkleidung aus Weißtanne, die Nähe zur umliegenden Natur.

In this exclusive climate wood house, the living and bathing house were combined into a harmonious unit by means of a one-story intermediate building. The use of a lot of light wood, with which the house ensemble scores, interpret the traditional Black Forest house in a completely new and modern way. Wooden facade layers in front of the glazing provide privacy and create an exciting interplay of light and shadow. The interiors impress with exposed wood ceilings in noble, knot-free silver fir - on the upper floor down to the ridge of the gable roofs.   

Configuration overview

Components used

  • LIGNO® Rippe Q3  |  Ceiling component

    Product code:LIGNO®Rippe_Q3_150-210_r0_ssp_z26_p0_a50g_625-12n25-4_WTL_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _r0 Open, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _150-210 Small span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z26 REI 30 Fire resistance

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a50g Integrated absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.


     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12n25-4 Slat profile "nature"

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

  • LIGNO® Block Q3  |  Roof component

    Product code:LIGNO®Block_Q3_230-290_rg0_s0_z0_p0_a0_625-12n25-4_WTL_gs_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _230-290 Medium span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.


     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12n25-4 Slat profile "nature"

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gs Sanded

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

  • LIGNO® Akustik light  |  Ceiling cladding

    Product code:LIGNO Akustik light 3S_33_a70g_625-12n25-4_WTL_gb_buv
    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.


     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12n25-4 Slat profile "nature"

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a70g 70 % Absorber

  • LIGNO® Uni Q3  |  Wall component

    Product code:LIGNO® Uni Q3_110_625_NSi_gh_b0
    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Element height

    _110 mm 

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.


     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625 

    Holzart


    Für die Sichtlage stehen verschiedene Holzarten zur Verfügung. Einzelne Holzarten sind aus Qualitätsgründen nicht für alle Profilierungen konfigurierbar, aus technischen Gründen sind für manche Holzarten  Oberflächenbehandlungen ausgeschlossen. 

    Wood type

    _NSI Industrial quality

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gh Planed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated

  • LIGNO® U*psi  |  Insulation joist

    Product code:LIGNO U*psi F_g_240
    Insulation joist


    The lower the U-value of a component and the lower the psi value of the details, the less heat is lost. This is precisely where the U*psi® cross-laminated timber insulating uprights from Lignotrend come into effect: They implement high insulating thicknesses in natural timber and minimise thermal bridges.

    Insulation joist 

    Fleece as chamber separation

Reference-related 

downloads

Project participants

  • KUNER ARCHITEKTEN PartmbB

    Architect

    Im Schnabelstal 2

    78120 Furtwangen im Schwarzwald
     

    www.kuner-architekten.de

  • Holzbau Amann GmbH

    Execution

    Albtalstraße 1
    79809 Weilheim

    www.holzbau-amann.de

  • MARKUS GUHL FOTOGRAFIE

    Photographer

    Kernerstraße 22B

    70182 Stuttgart

     

    www.architekturfotograf-markus-guhl.com

  • Related references

      Single-family house in Eschenz

      A spacious floor plan and natural materials make living in the home-healthy ...

      8264 CH-Eschenz

      View
        Ein wohngesundes Holzhaus, das sich harmonisch in die Landschaft einfügt und nicht rustikal, sondern klar und modern wirkt. titleDie direkt unter der Dachschräge liegende Küche wird durch bodentiefe Fenster lichtdurchflutet. Der dunkle Fußboden bildet einen spannenden Kontrast zur hellen Fichtenholz-Decke. Über die verbauten LIGNO® Außenwände entschieden sich die Bauherren innen für eine weiß verputzte Gipsbetonverkleidung.Die bodentiefen Fenster im Essbereich öffnen den Zugang zu einer großzügigen Terrasse. Die drei Komponenten Fichtenholz-Decke, dunkler Steinboden und weiß verputzte Wände bilden ein kontrastreiches Trio. Das großzügige Outdoor-Wohn-Deck wird über eine Treppe direkt mit dem Garten verbunden und dient so als Verbindungsglied zwischen Obergeschoss und Natur. titleDie Außenwände made of LIGNO® wurden bei diesem EFH mit einer hinterlüfteten Vorhangfassade aus edlen, grauen Faserzementplatten verkleidet.

      Holiday home on Lake Neukloster

      Four walls, large windows, a roof and lots of light wood: architecture can be so simple and just...

      23992 Nakenstorf

      View
        titletitletitletitletitletitletitletitle