Shop page iconDownload page icon

Choose your language

Wood enters the city

Eight-storey building in Freiburg with ceilings made of LIGNO®

Achtgeschossiger Holzbau mit CLT-Deckenelementen made of LIGNO® für Schallschutz und gute Raumakustik
Die 30 Wohneinheiten des Buggis mit großen, hellen Räumen mit den LIGNO®-Deckenelementen aus Weißtanne sichtbar als Designelement im Raum.
Deckenelemente aus CLT sorgen für eine warme Atmosphäre im Wohnraum und optimalen Schallschutz.
Nachhaltige Brettsperrholz Deckenelemente aus regionalem Holz optimieren den Schallschutz im mehrgeschossigen Wohnbau
CLT-Decken aus regionalem Holz für nachhaltigen, mehrgeschossigen Wohnbau mit gutem Schallschutz
Nachhaltige Brettsperrholz-Elemente in Kombination mit vielen Fenstern sorgen für eine helles, angenehmes Raumklima
Bodentiefe Fenster öffnen den hellen Raum zum Balkon, ausgestattet mit Brettsperrholz Decken aus Weißtanne
Holzrahmenbau mit materialeffizienten Brettsperrholz-Rippenelementen für den Deckenaufbau im mehrgeschossigen Bau
Materialeffiziente Brettsperrholz-Decken made of LIGNO® im achtgeschossigen Holzbau
Geschossdecken aus sichtbaren Brettsperrholz-Elementen für guten Schallschutz im mehrgeschossigen Bau
Nachhaltige, materialeffiziente CLT-Deckenelemente made of LIGNO® im achtgeschossigen Holzbau in Freiburg
Die im mehrgeschossigen Gebäude eingesetzten LIGNO®-Deckenelemente sind alle FSC geprüft.
Erstes FSC-zertifizierte Holzgebäude Deutschlands, als Holzständerbau aufgestellt – mit nachhaltigen Decken made of LIGNO®
Bauphase eines mehrgeschossigen Mehrfamilienbaus mit brandbeständigen CLT-Decken made of LIGNO®

It is a building that is unparalleled in this country so far: "Buggi 52", the first FSC-certified wooden building in Germany, was erected in Freiburg at the end of 2020. With a total height of 25 metres, the building on Bugginger Straße is just below the high-rise limit, and even the lift shaft, staircase and exterior façades are made of wood. The cross laminated timber specialist Lignotrend is also involved: the timber construction company Holzbau Bruno Kaiser GmbH from Bernau was able to use the products of the manufacturer, who is also based in the region, for the load-bearing ceiling components of the innovative eight-storey building. They met the high requirements without any gaps: The best sound insulation between the residential floors with a total of 30 residential units and the 90-minute fire resistance required in building class 5 are ensured without cladding the wooden surface. 

Configuration overview

Components used

  • LIGNO® Rippe Q3  |  Ceiling component

    Product code: LIGNO® Rippe Q3_230-290_r0_ssp_z80_p0_a0_625-51-1_WTE_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _r0 Open, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _230-290 Medium span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z80 REI 90 Fire resistant

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.  

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-621-4 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTE Silver fir, economy 

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

  • LIGNO® Rippe Q3  |  Ceiling component

    Product code: LIGNO® Rippe Q3_230-290_rg0_s0_z80_p0_a0_625-12-4_WTE_gb_buv
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _230-290 Medium span

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z80 REI 90 Fire resistant

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected. 

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation. 

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-12-4 Slat profile

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTE Silver fir, economy

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches.  Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _buv UV-protection stain

Reference-related

Downloads

Project participants

  • Weissenrieder Architekten BDA

    Architect

    Zasiusstraße 76

    79102 Freiburg
     

    www.architekt-weissenrieder.de

  • Holzbau Bruno Kaiser GmbH

    Execution

    Gewerbegebiet Gässle 7
    79872 Bernau im Schwarzwald

    www.holzbau-bruno-kaiser.de

  • GRANACHER

    Photographer

    Hofwiese 10
    79809 Weilheim

     

    www.simplexxx.de

  • Related references

      Appartment building in Nürtingen

      Create living space, not only for themselves, but also for a few more families...

      72622 Nürtingen

      View
        Die zwei zueinander versetzten Holzgebäude mit Satteldach zur Straße hin und Flachdach den Streuobstwiesen zugewandt bilden trotz Material-und Stilmix eine harmonische Einheit.Diese Wohnung besticht mit einem großzügigen Wohnbereich, in welchem Wohn-, Esszimmer und Küche fließend ineinander übergehen und durch edle Echtholzdecken in Weißtanne made of LIGNO® verbunden werden.In dem modern eingerichteten Wohnbereich tragen die edlen Weißtannenoberflächen an der Decke zu einem Gefühl von Wärme und Naturverbundenheit bei und eine gemütliche Atmosphäre entsteht.Die Besonderheit der hier verarbeiteten LIGNO Deckenbauteile ist die endfertige Echtholzoberfläche aus astreiner Weißtanne, was mit seiner edlen Erscheinung den Ruf von Holz als rustikales Material widerlegt.Das Schwarz der Küchenverkleidung findet sich auch in einer deckentragenden Metallsäule und dem schwarzen Kühlschrank wider. Dem entgegengewirkt wird durch die helle Weißtannendecke und hellgraue Bodenfliesen.Dieses Badezimmer bekommt einen besonderen Flair durch die kunstvoll bedruckte Wand in Blau-und Grüntönen, sowie die feine Deckenprofilierung, die eine dynamische Atmosphäre kreiert. Dafür, dass im Essbereich auch bei vielen Gästen der Geräuschpegel nicht Überhand nimmt, sorgen Lignotrend-Decken mit integriertem Absorber, die mit ihrer feinen Profilierung gleichzeitig als Designelement in der Wohnung wirken.Der große Esstisch wird in Szene gesetzt von drei industriell anmutenden Hängelampen und die Sichtseite der Deckenbauteil verströmen mit ihrer edlen Oberfläche aus Weißtanne eine wohngesunde Raumatmosphäre. Modernes Mehrfamilienhaus made of LIGNO® in NürtingenDer seitlich verglaste Wohnbereich ist mit dunklen Böden ausgestattet, was einen aufregenden Kontrast zu den endfertigen Echtholzoberflächen der LIGNO® Decken aus astreiner Weißtanne darstellt. Der großzügige Esstisch dieser Wohnung in dem Nürtinger Klimaholzhaus fasst die Farbe der hellen LIGNO® Decke in Weißtanne auf  und bildet einen klaren Kontrast zu dem dunklen Boden. Diese großzügige Galerie verströmt durch die Öffnung bis unter das Spitzdach Weite und die Echtholzsichtseite der verbauten LIGNO® Elemente kommt hier besonders gut zur Geltung.Dieser Flur direkt unter dem Spitzdach punktet mit Decken und Böden in warmem, unregelmäßigen Holz, viel Licht und Zugang zum Balkon. Dieser Raum direkt unter dem Spitzdach ist rundum in Holz gekleidet, was zu einem maximalen Gefühl von Wärme und Naturverbundenheit führt - hier lassen sich die wohngesunden Eigenschaften der LIGNO® Bauteile ganz besonders gut spüren. Die beiden neugebauten, sehr unterschiedlichen Klimaholzhäuser wirken sehr modern und fügen sich zugleich wunderbar  in die ländliche Wohnumgebung ein.

      Apartment building in the Riedpark

      Wood stands the test: fire protection, sound insulation, earthquake resistance - modern wooden buildings have...

      79787 Lauchringen

      View
        titleKüche eines Mehrfamilienhauses in Holzbauweise mit Akustikdecken LIGNO® Akustik light und gipsbekleideten Wandelementen LIGNO® Uni | Mehrfamilienhaus Riedpark Lauchringentitletitletitletitletitletitle