House Ottoweg
High ceilings clad with noble silver fir create a feel-good atmosphere
The new addition to this single-family home is composed of a kitchen, dining room and living area. Light natural tones, together with generous windows and ceilings that reach to the roof ridge, create wide, bright spaces that invite you to relax and linger. The acoustic panels made of silver fir make a special contribution to this atmosphere. The noble wooden surface not only acts as a warm contrast to the white walls, but also contributes to a quiet room atmosphere thanks to its sound-absorbing properties.
Configuration overview
Components used
LIGNO® Akustik light | Ceiling cladding
Product code: LIGNO® Akustik light 3S_33_a70g_625-12n25-4_WTS_gb_buvWood type
Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.Wood type
_WTS Silver fir knotless, plain
Profile
The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.Note: Some profiles indirectly cause exclusions for other configuration options.
Profile
_625-12n25-4 Slat profile "nature"
Structure
The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.Structure
_gb Brushed
Treatment
Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.Treatment
_buv UV-protection stain
Room acoustics
If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.Room acoustics
_a70g 70 % Absorber
Reference-related
Downloads
Project participants
Middelberg Venhaus Architekten GmbH
Gebr. Busmann Holzbau GmbH
Related references
Haus der Planer
In Tübingen, an administration building from the 1960s was converted and extended by a residential and commercial building: Ten apartments and...
72074 Tübingen
ViewSingle-family house Hohlen in Dornbirn
The ground floor of the single-family house for a family of five, which is pushed into ...
05572 AT-Dornbirn
View