Shop page iconDownload page icon

Choose your language

Single-family house made of LIGNO® in Michelfeld

Shop window into nature 

Dieses Klimaholzhaus erfüllt jegliche Energiestandards und sorgt für ein bestmögliches Raumklima im Inneren, was nachhaltig wohngesundes Leben verspricht.
Die sichtbaren Holzunterseiten der verbauten LIGNO® Deckenbauteile bilden einen warmen Kontrast zu den dunklen Kacheln.
Das Obergeschoss öffnet sich bis unter das Satteldach und Decken und Böden in hellem Holz sorgen für eine angenehm warme Raumatmosphäre.
Das helle Kinderzimmer liegt direkt unter dem Satteldach und die schrägen Decken in LIGNO® Holz sorgen für eine angenehme Raumatmosphäre.
Dieses Schlafzimmer punktet mit hohen abgeschrägten Decken in hellem Holz und die bodentiefen Fenster sorgen für viel Licht in dem Raum.
Die hellen Holzdecken-und Böden bilden zusammen mit den cremefarbenen Wänden ein harmonische Raumkonzept, welches einlädt zum Entspannen.
Im Wohn-und Essbereich des Klimaholzhauses wurden Wände und Decken hell verputzt und bilden so einen Kontrast zu den dunklen, edlen Steinböden.
Im Wohnbereich schaffen gerade Linien und deutliche Farbkontraste für Klarheit und Minimalismus, bei wohngesunder Raumatmosphäre.
Wände und Decken des Wohnbereich wurden komplett verputzt, was dem Raum ein modernes, klares und zeitloses Aussehen verleiht.
Der Wohnbereich wird durch ein unaufdringliches Weiß und verschiedene Grautöne charakterisiert, was für ein modernes und zeitloses Erscheinungsbild sorgt.
Der Wohnbereich wird definiert durch ein klares Farb-und Formkonzept in grau und weiß und geraden Linien.
Während der zur Straße gerichtete Hausteil weiß verputzt ist, wurde der zur Straße gerichtete Querbau mit einer feinen Lattung aus witterungsbeständiger, thermobehandelter Tanne verkleidet.

Wood is an excellent building material: it is sustainable, offers the best thermal protection, design flexibility and durability. It absorbs heat and moisture and releases them again, thus improving the indoor climate in the house - if it is installed to the right extent in the right place. The optimized indoor climate is the main reason why living in a Klimaholzhaus is so pleasant. As Klimaholzhaus-experts from Holzbau Lang, Nina and Stefan Wengertsmann have already implemented many of the healthy living timber houses. They know all the advantages of the building philosophy and enjoy finally living in their own Klimaholzhaus. Individually planned and of stable value, it offers the family the greatest possible living freedom and lasting quality of life.

Configuration overview

Components used

  • LIGNO® Rippe Q3  |  Ceiling component

    Product code: LIGNO® Rippe_Q3_150-210_r0_s0_z0_p0_a0_625-621-4_NSI_gh_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _r0 Open, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics

    _150-210 Small span  

    Fire resistance


    Unterhalb des Stegbereichs schliesst sich bei Brandschutz-Anforderung eine Zusatzlage an (bei Elementen mit Leistenprofilen _z26, _z53, _z80, bei Elementen mit Brettprofilen Akustik klassik _k50g). Ihre Höhe bestimmt die Feuerwiderstandsdauer des Querschnitts von 30 bis 90 Minuten. Der Feuerwiderstand muss statisch nachgewiesen werden. Gibt es keine Anforderungen, sind die Standardausführungen _z0 oder _k50l zu wählen.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-621-4 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _NSI Industrial quality 

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gh Planed 

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated 

  • LIGNO® Block Q3  |  Roof component

    Product code: LIGNO® Block_Q3_230-290_rg0_s0_z0_p0_a0_625-621-4_WTL_gb_b0
    Installation top


    Whether the element is open or closed at the top is determined by the area of application. If, for example, the element is to be filled with fill on site as a storey ceiling or roof terrace (LIGNO® Rippe Q3-x), its cavities are open at the top (feature _r0). To guide pipes at the top of the element, a cross grid (_r25, _r50) can be added to some superstructures. For roof superstructures, there is usually a flat closed finish _rg0 (LIGNO® Block Q-x, LIGNO® Block Q3-x or corresponding versions of LIGNO® Acoustic classic).

    Installation top

    _rg0 Closed, without cross grid

    Statics


    The height of the load-bearing webs of the element is variable and determined according to static requirements from load and span. Within the framework of this configurator, the selection is limited to four height ranges. A more precise definition is made later during pre-dimensioning or verification with the LTB-x calculation programme. Bulk volume and/or necessary space for installations can also be decisive for the height.

    Statics 

    _230-290 Medium span  

    Fire resistance


    If fire protection is required, an additional layer is added below the web area (for elements with strip profiles _z26, _z53, _z80, for elements with board profiles Akustik klassik _k50g). Their height determines the fire resistance duration of the cross-section from 30 to 90 minutes. The fire resistance must be statically verified. If there are no requirements, the standard versions _z0 or _k50l are to be selected.

    Fire resistance

    _z0 R0

    Cavity


    Panel designs with slat profiles and additional layer can be configured with an additional cavity (_p26, _p53) below the additional layer for installation guides, fixtures or to improve sound absorption. Cables laid there then do not penetrate the fire-protection layer. If required, the cavity is filled with insulating material (_p26mw, _p26ha) to improve acoustic absorption. If no cavity is necessary, the characteristic _p0 is selected.

    Cavity

    _p0 No cavity

    Room acoustics


    If the soffit of the element is to have a good sound-absorbing effect, the penultimate layer is configured as absorber _a50g. Otherwise, this layer is configured as a solid wood layer _a0.

    Room acoustics

    _a0 Without absorber

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.

     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625-621-4 Closed surface

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _WTL Silver fir knotless, patterned 

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gb Brushed 

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated 

  • LIGNO® Uni Q3  |  Wall component

    Product code: LIGNO® Uni Q3_110_625_NSI_gh_b0
    Element height


    Die Höhe der tragenden Stege des Elementes ist variabel und bestimmt sich gemäß statischer Bedürfnisse aus Belastung und Spannweite. Im Rahmen dieses Konfigurators ist die Auswahl auf vier Höhenbereiche beschränkt. Eine genauere Festlegung erfolgt später bei der Vordimensionierung bzw. dem Nachweis mit dem Berechnungsprogramm LTB-x. Auch Schüttvolumen und/oder notwendiger Raum für Installationen können für die Höhe massgebend sein.

    Element height

    _110 mm 

    Profile


    The visible layer is profiled with joints. The code for profiling indicates in millimetres: Element width, strip width (rounded, from/to if applicable) and joint width (rounded) as well as a letter identification for variants, e.g. with chamfered strip edges or with additional height gradation.
     

    Note: Some profiles indirectly cause exclusions for other configuration options.

    Profile 

    _625

    Wood type


    Various wood species are available for the visible layer. For quality reasons, individual wood species cannot be configured for all profiles; for technical reasons, surface treatments are excluded for some wood species.

    Wood type

    _NSI Industrial quality 

    Structure


    The face is subjected to a brushing _gb as standard, which produces a stronger or weaker structure depending on the type of wood and makes the surface less sensitive to scratches. Alternatively, a smooth sanding _gs can be carried out, or on request a bandsaw cut _grimitated.

    Structure

    _gh Planed 

    Treatment


    Depending on the type of wood, the optional application of a surface treatment is possible ex works. Individual colour finishes are always sampled for coordination. For elements in individual lengths, colour treatment is limited to max. 5 m length.

    Treatment

    _b0 Untreated 

  • LIGNO® U*psi  |  Insulation joist

    Product code: LIGNO® U*psi F_n_240
    Insulation joist


    The lower the U-value of a component and the lower the psi value of the details, the less heat is lost. This is precisely where the U*psi® cross-laminated timber insulating uprights from Lignotrend come into effect: They implement high insulating thicknesses in natural timber and minimise thermal bridges.

    Insulation joist 

    Fleece as chamber separation

Reference-related

Downloads

Project participants

  • Katrin Moll

    Architect

    74538 Rosengarten
     

     

  • Holzbau Lang Holzfachmarkt GmbH

    Execution

    Mühlstraße 14

    74545 Michelfeld

     

    holzexperte.de/
     

  • Uwe Röder

    Photographer

    Murgtalstraße 44

    76476 Bischweier

     

    www.fotografie-roeder.de/

  • Related references

      Klimaholzhaus:
      Cube Alpnach

      When Waser Holzbau AG was awarded the building contract, there was still a wooden house from the 1970s...

      6055 CH-Alpnach

      View
        titletitletitleDer Esstisch befindet sich vor einer bodentiefen Fensterfront, die beim Essen den Blick ins Freie öffnet und Natur mit Innerem verbindet.titletitletitle

      Klimaholzhaus at the Oberalbis

      "Wood is a fantastic material," Mark Hofstetter from Glarus is convinced of that. 

      CH - Oberalbis 

      View
        Die wohngesunden Brettsperrholzelemente von Lignotrend überzeugten den Bauherr, welchem ökologisches, baubiologisch richtiges und nachhaltiges Bauen am Herzen lag.titletitletitletitletitletitletitletitletitletitle